LiftMaster K94-37449 Reset Button with Identification Resistor — CSW200
The LiftMaster K94-37449 is the reset-button service assembly with identification resistor listed for the documented CSW200U and CSW200UL control arrangement. It must match the operator generation, wiring and approved service reference. This is not a generic pushbutton, an on/off switch or permission to use a different identification component to bypass an unresolved operator fault. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Matching CSW200 control | Confirm K94-37449 in the actual parts list. |
| Other reset kits | Similar appearance does not establish equal ID configuration. |
| On/off switches | Different function and circuit. |
| Unresolved faults | Reset-button replacement does not correct the initiating problem. |
Identify the Assembly and Plan the Repair
The identification portion is part of the exact service selection, so compare more than the button’s shape or mounting hole. Record the full operator and existing assembly number and inspect the connection before ordering. Do not select another resistor or switch to make the controller accept a different configuration.
A reset complaint can come from damaged wiring, a failed button or a condition that correctly prevents normal operation. Have the technician diagnose the full circuit and operator status. Restore the approved reset function without defeating the alarm or monitored protection and verify the required gate functions after service.
An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K94-37449 |
| Component | Reset button with ID resistor |
| Documented family | CSW200 U / UL arrangements |
| Selection check | Exact control revision, connector and service diagram |
| Resistance value | No unverified ohmic specification is claimed |
Before Ordering
- Read the full operator model and control revision.
- Match the exact reset-button and ID reference.
- Inspect mounting, connector and wiring condition.
- Diagnose any recurring fault before replacement.
Package Contents and Separate Requirements
This offer identifies the reset button with ID-resistor service assembly. Confirm current supplied leads, connector and mounting pieces. A control board, power board, alarm, full wiring harness, on/off switch and complete operator are not established as included.
Safety Warnings — Read Before Installation or Service
- WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
- Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
- Do not bypass grounding, overload protection, monitored safety devices or fire-control functions to make the equipment operate. Diagnose the underlying fault.
- Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Can any pushbutton replace it?
No. The ID configuration, electrical arrangement, connector and approved service reference must match.
Does it include the main board?
No complete board is identified. It is the reset-button/ID service item.
Will a new button clear every fault?
No. Diagnose and correct the underlying cause of the fault rather than rely on repeated resets.
Is the resistor value specified here?
No unverified ohmic value is claimed. Use the exact approved service component for the installed configuration.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.