LiftMaster K75-12830 Gear Housing / Reducer Service Kit — Documented 1 HP, 230–460V Configuration
The LiftMaster K75-12830 identifies the gear-housing or reducer service kit associated with the documented GH commercial operator configuration. The current SKU list describes a 1 HP, 230/460V Logic 4 application, while earlier service tables group a wider half-to-one-horsepower arrangement under the reference. Match the full operator generation and current service recommendation before ordering rather than inferring interchangeability from the abbreviated title. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Exact GH service application | Confirm the complete model, rating and current kit recommendation. |
| Other horsepower versions | Separate kit references require individual checks. |
| Other voltages / generations | Do not infer an equivalent brake or housing arrangement. |
| Bare reducer versus housing kit | Confirm the actual supplied assembly scope. |
Identify the Assembly and Plan the Repair
A gear-housing kit can involve more components than a bare reducer, and the operator’s brake and manual-drive arrangement affect the service selection. Record the existing housing, motor and operator labels and confirm what the current package retains or replaces. Do not assume a motor or a specific complete gearbox inventory from the word kit alone.
Inspect the drive for abnormal loading, worn supports, leakage or a door that does not move freely. A new housing assembly will not correct those external causes of failure. Use the service instructions for the exact revision to restore mounting, drive alignment, manual operation and the required brake and protection tests.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K75-12830 |
| Component | Gear-housing / reducer service kit |
| Current list context | 1 HP, 230/460V, Logic 4 |
| Historical scope | Earlier tables use 1/2–1 HP wording; verify exact application |
| Electrical distinction | Voltage describes the operator configuration, not a standalone supply connection |
Before Ordering
- Record the full GH model, voltage and horsepower.
- Resolve historical versus current application wording.
- Confirm current housing/reducer kit contents.
- Inspect the drive and plan the complete service checks.
Package Contents and Separate Requirements
This offer identifies the K75-12830 gear-housing/reducer service kit. Confirm the current housing, cover, reducer, brake and manual-drive pieces actually supplied. A motor, complete operator, field wiring and every component in a historical gear-housing package are not assumed included without current confirmation.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving commercial door and exposed gear housing / reducer service kit — documented 1 hp, 230–460v configuration can cause serious injury or death. Have a trained door-systems technician perform installation and service.
- Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
- Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
- Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Is 230/460V a direct gearbox connection?
No. It identifies the documented operator configuration; follow the complete equipment wiring and service information.
Will it fit every 1 HP GH?
No universal fit is established. Generation, voltage, brake and mechanical arrangement must also match.
Why do older tables mention 1/2–1 HP?
The historical grouping differs from the current short description. Confirm the exact current application with the supplier.
Does it include a motor?
No motor is established as included. Confirm the current kit inventory before deciding whether additional service components are needed.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.