LiftMaster K75-12586 Complete Brake Kit — 575 V GH, Logic 4 and Prior
The LiftMaster K75-12586 is the complete-brake service kit identified in the manufacturer brake instructions for the 575 V GH commercial-door operator arrangement using Logic 4 or prior controls. Match the full operator voltage and generation before ordering. The same instructions identify different kits for Logic 5 applications, so a GH model name or similar brake appearance alone is insufficient. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| 575 V GH with Logic 4 or prior | Confirm K75-12586 in the manufacturer instructions. |
| Logic 5 GH | Different kit selection; do not infer compatibility. |
| Other voltage versions | Separate brake-kit references apply. |
| Other commercial operator models | No universal 575 V brake fit is established. |
Identify the Assembly and Plan the Repair
A brake repair must address the mechanical holding arrangement and its electrical release circuit. Have qualified personnel inspect the installed brake, supply and wiring before selecting a complete kit. Confirm the actual operator label and control generation rather than use the building supply alone as the identification. A brake that does not release may have a circuit fault as well as mechanical wear.
The manufacturer instructions identify multiple service versions and a prescribed installation procedure. Compare the current kit inventory with the required hub, friction, release and solenoid components and obtain any separate pieces the exact revision requires. Secure the door before brake work and complete the manufacturer’s release, holding and operator functional checks after installation; do not use a new brake to compensate for an unsafe door.
An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K75-12586 |
| Component | Complete brake service kit |
| Documented application | GH, Logic 4 and prior |
| Voltage version | 575 V |
| Documented component groups | Hub, release lever, disc, cups, springs, pressure plate, solenoid assembly and fastening pieces |
| Later controls | Logic 5 uses separately identified kit references |
Before Ordering
- Record the complete GH label, 575 V rating and logic generation.
- Confirm K75-12586 for Logic 4 or prior.
- Inspect the brake circuit and mechanical wear together.
- Confirm current contents and prescribed holding/release tests.
Package Contents and Separate Requirements
The researched instructions identify the complete brake kit’s hub, release lever, disc, cups, springs, pressure plate, 575 V solenoid assembly and related retaining/fastening pieces. Confirm current quantities and revision. A motor, complete electrical box, door counterbalance system and operator are not established as included.
Safety Warnings — Read Before Installation or Service
- WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
- Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
- Do not bypass grounding, overload protection, monitored safety devices or fire-control functions to make the equipment operate. Diagnose the underlying fault.
- Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Is this the Logic 5 kit?
No. The researched instructions distinguish the Logic 4-and-prior kits from later Logic 5 references.
Will it fit any 575 V operator?
No. Match GH, control generation and the exact brake arrangement.
Is a solenoid assembly identified?
Yes. The documented kit includes the matching 575 V solenoid assembly among its component groups.
Can it repair a badly balanced door?
No. Qualified personnel must correct the door condition and verify the approved brake and operator functions.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.