LiftMaster K72-12506 Clutch Shaft Kit — T Operators, 1/3 and 1/2 HP
The LiftMaster K72-12506 is the clutch-shaft kit identified for documented T commercial trolley operators in the 1/3- and 1/2-horsepower configurations. It supplies a coordinated set of clutch and drive-service components rather than an output shaft or complete trolley system. Match the installed operator generation, horsepower and parts drawing before ordering. The corresponding 3/4- and 1-horsepower arrangement uses a different kit reference, so selecting by the T model family alone can result in the wrong mechanical package.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Documented T 1/3 HP / 1/2 HP | Match the appropriate manufacturer repair drawing. |
| T 3/4 HP / 1 HP | Different kit reference; do not substitute. |
| J / H / HJ clutch assemblies | Different service packages and drive arrangements. |
| Older T generations | Confirm their own repair reference before assuming interchangeability. |
| Output shafts or complete trolley rails | Separate components and repair scope. |
Find the Cause of Clutch Slipping Before Reassembly
A clutch can slip because of wear, an incorrect adjustment or excessive load elsewhere in the system. Have the technician inspect the pulley, sprockets, bearings and door movement before replacing parts. Tightening the clutch to force a binding door through its travel can hide the real problem. Preserve the specified mechanical arrangement and correct the underlying fault before returning the operator to service.
Compare the complete assembly with the model-specific service drawing, including the spring, hub and retention components. A kit containing several small parts should be inventoried before the old mechanism is dismantled. Keep the output-shaft and clutch-shaft references separate when planning the repair. Follow the manufacturer adjustment procedure after reassembly and verify travel limits and protection functions under controlled conditions.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K72-12506 |
| Product | Clutch shaft kit |
| Documented model | T commercial trolley operator |
| Power configurations | 1/3 HP and 1/2 HP |
| Different higher-power kit | K72-12507 |
| Selection basis | Exact generation, horsepower and clutch assembly |
Before Ordering
- Record the operator model, generation and installed clutch arrangement.
- Match the clutch kit reference rather than the output-shaft number.
- Inspect drive wear, bearings and the cause of excessive load.
- Confirm kit inventory and required post-service clutch adjustment.
Package Contents and Separate Requirements
The documented K72-12506 inventory includes the clutch shaft and plate, 3/4-inch-ID bearing, 41B10 sprocket, 5L belt, motor pulley, spring, clutch disc and associated shims, washers, nut, pins and fastening pieces. Compare the current delivered kit with its applicable parts drawing. A motor, complete output-shaft assembly, trolley rail and door counterbalance hardware are separate requirements. The quantity of components illustrated in the full operator does not make every adjacent part part of this kit.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving commercial door and exposed clutch shaft, spring and pulley can cause serious injury or death. Have a trained door-systems technician perform installation and service.
- Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
- Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
- Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Which horsepower versions are listed?
The documented T applications are 1/3 HP and 1/2 HP.
Does it replace K72-12507?
No automatic substitution is established; that reference serves a different horsepower grouping.
Is a complete trolley rail included?
No. This is the clutch-shaft service package.
Can clutch tightening correct a binding door?
No. Diagnose door movement and the drive before adjusting the clutch.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.