LiftMaster K41-0373-000 20-Tooth #48 Drive Sprocket — MAXUM TDC 700

LiftMaster K41-0373-000 20-Tooth #48 Drive Sprocket — MAXUM TDC 700

$114.15
Skip to product information
LiftMaster K41-0373-000 20-Tooth #48 Drive Sprocket — MAXUM TDC 700

LiftMaster K41-0373-000 20-Tooth #48 Drive Sprocket — MAXUM TDC 700

K41-0373-000
$114.15
Shipping calculated at checkout.

The LiftMaster K41-0373-000 is the 20-tooth drive sprocket for the #48 chain arrangement identified for the MAXUM TDC 700 trolley operator. It is distinct from the #41 sprocket references used on documented TDC 1200 and 2200 configurations. Confirm the exact operator model and chain arrangement before selecting this motor-drive service component. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
TDC 700 / TDC7 Match K41-0373-000 in the applicable manual.
#48 chain Required documented drive arrangement for this service selection.
TDC 1200 / TDC 2200 Do not substitute this #48 sprocket for separately identified #41 versions.
Other trolley generations No universal commercial trolley fit is established.

Identify the Assembly and Plan the Repair

The correct sprocket keeps the approved motor-drive and chain combination together. Do not choose another chain series or tooth count to change travel speed or capacity. The operator’s complete drive configuration and service revision determine the replacement, not the fact that several MAXUM models share a similar frame.

Inspect the existing chain, mounting and adjoining drive components for wear or misalignment. A replacement sprocket alone will not correct a damaged chain path or unsafe door movement. Confirm all unstated bore, retention and hub requirements through the current parts information before dismantling the assembly, then complete the manufacturer’s prescribed drive and travel checks.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Specifications and Product Identification

Specification Details
Ordering reference K41-0373-000
Function Trolley-operator drive sprocket
Tooth count 20
Chain series #48
Documented platform MAXUM TDC 700 / TDC7
Other models Different #41 sprocket references are separately listed

Before Ordering

  • Read the full TDC model and service revision.
  • Confirm 20 teeth and the #48 chain configuration.
  • Distinguish the TDC 700 service reference from #41 versions.
  • Inspect chain condition and verify separate retention requirements.

Package Contents and Separate Requirements

This offer identifies the K41-0373-000 drive sprocket service item. A full chain, shaft key, motor/gearbox assembly, rail, trolley and complete operator are not established as included. Confirm the supplied sprocket and retention pieces and obtain any other worn drive components separately.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving commercial door and exposed 20-tooth #48 drive sprocket — maxum tdc 700 can cause serious injury or death. Have a trained door-systems technician perform installation and service.
  • Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
  • Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
  • Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.

Related Products and Important Differences

Frequently Asked Questions

Is it the #41 sprocket for TDC 1200?

No. This reference is identified for the #48 TDC 700 arrangement; the manual lists different #41 references.

How many teeth does it have?

The current manufacturer service table identifies a 20-tooth sprocket for this reference.

Does it include the motor?

No motor assembly is established as included. The sprocket and motor/gearbox service references are separate.

Can it change operator capacity?

No capacity conversion is established. Restore the exact approved drive arrangement for the installed model.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products