LiftMaster K41-0372-000 MAXUM #41 Drive Sprocket — Verify TDC Revision

LiftMaster K41-0372-000 MAXUM #41 Drive Sprocket — Verify TDC Revision

$114.15
Skip to product information
LiftMaster K41-0372-000 MAXUM #41 Drive Sprocket — Verify TDC Revision

LiftMaster K41-0372-000 MAXUM #41 Drive Sprocket — Verify TDC Revision

K41-0372-000
$114.15
Shipping calculated at checkout.

The LiftMaster K41-0372-000 is the #41 drive-sprocket service reference listed in MAXUM trolley-operator documentation. Earlier tables group it with the 1200/2200 arrangement, while a later table describes a 20-tooth #41 sprocket for TDC12 and separately lists a 16-tooth alternative. Match the current operator and drive revision before ordering rather than rely on the shortened 1200/2200 catalog wording alone. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Matching TDC12 arrangement Confirm K41-0372-000 and the required tooth count.
TDC22 / older 1200-2200 wording Resolve exact revision against the current parts table.
TDC7 #48 drive Separate K41-0373-000 reference.
Chain and ratio Do not substitute tooth counts or chain series without approval.

Identify the Assembly and Plan the Repair

The number 41 identifies the chain series, not the sprocket tooth count. Manufacturer revisions distinguish drive configurations, so compare the existing sprocket and exact operator label with the current approved table. A matching chain series alone does not resolve the documented tooth-count and model-generation differences.

Inspect the mating chain, shaft attachment and drive alignment before choosing the replacement. A worn chain or damaged support can affect the new sprocket as well as the old one. Confirm current supplied retention pieces and follow the approved setup without using a tooth-count change as an improvised speed or capacity conversion. Complete travel, stopping and protection checks after service.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Specifications and Product Identification

Specification Details
Ordering reference K41-0372-000
Component Drive sprocket for #41 chain
Later documented description 20-tooth #41 sprocket, TDC12
Earlier table wording 1200/2200 drive sprocket
Separate later reference K41-0564-000, 16-tooth #41 TDC12/TDC22
Selection requirement Confirm current complete drive recommendation

Before Ordering

  • Record the full MAXUM TDC model and revision.
  • Confirm #41 chain and the approved tooth count.
  • Resolve older 1200/2200 wording against the current table.
  • Inspect chain wear, alignment and shaft retention.

Package Contents and Separate Requirements

This offer identifies the drive-sprocket service component. Confirm current supplied retaining pieces. A complete trolley drive, chain, motor, encoder, rail, door arm and operator are not established as included. Obtain separate damaged parts only after the exact current drive configuration has been verified.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving commercial door and exposed maxum #41 drive sprocket — verify tdc revision can cause serious injury or death. Have a trained door-systems technician perform installation and service.
  • Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
  • Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
  • Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.

Related Products and Important Differences

Frequently Asked Questions

Does 41 mean 41 teeth?

No. It identifies the chain series. A later manufacturer table describes this reference as a 20-tooth sprocket.

Will it fit every TDC22?

Do not assume so. The later table separately lists a 16-tooth TDC12/TDC22 reference; confirm the actual revision.

Is it the #48 TDC7 sprocket?

No. That service arrangement has a separate reference.

Can a different tooth count increase capacity?

No conversion is established. Restore the manufacturer-approved complete drive ratio and configuration.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products