LiftMaster K41-0074-000 Control-Board Pivot Bracket and Slide — Heavy-Duty Gates

LiftMaster K41-0074-000 Control-Board Pivot Bracket and Slide — Heavy-Duty Gates

$173.70
Skip to product information
LiftMaster K41-0074-000 Control-Board Pivot Bracket and Slide — Heavy-Duty Gates

LiftMaster K41-0074-000 Control-Board Pivot Bracket and Slide — Heavy-Duty Gates

K41-0074-000
$173.70
Shipping calculated at checkout.

The LiftMaster K41-0074-000 is the control-board pivot-bracket and slide service reference identified in HDSL24UL heavy-duty gate repair information. It supports the specified control-board mounting arrangement. The phrase control board in the catalog name identifies the mounting location and should not be treated as proof that a main logic board is supplied. Confirm the exact installed bracket, slide and current package before ordering. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
HDSL24UL drawing specifying this assembly Match the exact control-support arrangement.
Main control board Separate electronics and service reference.
Other heavy-duty models Verify their exact mounting drawing.
Dust guard or outer cover Separate protective components and positions.

Identify the Assembly and Plan the Repair

Inspect the support, pivot and slide and any attached wiring after damage. A new bracket should restore the prescribed board position and access without bending the board or pinching conductors. Determine whether surrounding mounts or electronic components were also affected.

Follow the exact operator service procedure for supporting and transferring the control arrangement. Preserve clearances, cable routing and intended movement of the bracket/slide. This mechanical service item does not repair a failed main board, change the control generation or replace required enclosure panels.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference K41-0074-000
Component Control-board pivot bracket and slide
Documented example HDSL24UL
Separate main-board reference K41-0073-000 or exact revision
Electronics inventory Not established as included

Before Ordering

  • Confirm the full heavy-duty operator and bracket location.
  • Match K41-0074-000 in the parts drawing.
  • Inspect supports, pivot, slide and attached wiring.
  • Verify current hardware and separate board requirements.

Package Contents and Separate Requirements

This offer identifies the pivot-bracket and slide service assembly. Main board, expansion board, motor drive, wiring harness, dust guard and complete operator are separate unless expressly included. Confirm current mounting pieces and any board inventory with the supplier. Do not infer electronics inclusion solely from the shortened catalog name.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Support the board during bracket service and protect its wiring. Preserve intended clearances, slide movement and all separate enclosure guards.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

Is a main board guaranteed?

No. The main board is separately identified.

What does the assembly support?

The documented control-board mounting arrangement.

Will it fix a failed control circuit?

No. Diagnose electronics independently.

Does it replace the dust guard?

No. That is a separate service component.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products