LiftMaster K29-448 Bridge-Rectifier / Diode Service Component — 400V, 25A

LiftMaster K29-448 Bridge-Rectifier / Diode Service Component — 400V, 25A

$29.37
Skip to product information
LiftMaster K29-448 Bridge-Rectifier / Diode Service Component — 400V, 25A

LiftMaster K29-448 Bridge-Rectifier / Diode Service Component — 400V, 25A

K29-448
$29.37
Shipping calculated at checkout.

The LiftMaster K29-448 is the bridge-rectifier service item described in the supplier offer and identified as a 400V, 25A diode component in manufacturer parts literature. It belongs in the exact documented electrical circuit. Those component ratings do not define the connected operator’s supply voltage or establish that the part can replace every rectifier in LiftMaster equipment. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Circuits specifying K29-448 Match the exact service reference and terminal arrangement.
K41-0380-000 MAXUM rectifier Different service reference; no automatic interchangeability.
Operator supply selection Follow the operator nameplate and circuit diagram.
Other diodes or bridge assemblies Ratings alone do not establish pinout, mounting or suitable operation.

Identify the Assembly and Plan the Repair

Identify the failed electrical function before ordering. A rectifier converts the applicable alternating-current input to the required direct-current form within its circuit, but a fault can also involve wiring, supply components or the connected load. Have qualified personnel diagnose the complete circuit instead of assuming a failed power-up proves that the rectifier alone is defective.

Confirm terminal markings, polarity, mounting and any required thermal arrangement from the exact equipment documentation. This listing does not provide a universal connection diagram or authorize substituting terminals by their physical position. Preserve the intended wiring and protection, and investigate any overheating or repeated failure before installing the replacement.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference K29-448
Supplier description Bridge rectifier
Manufacturer description Diode, 400V, 25A
Voltage rating 400V component rating
Current rating 25A component rating

Before Ordering

  • Confirm K29-448 in the equipment circuit.
  • Record terminal references with power isolated.
  • Inspect supply, wiring and connected load.
  • Obtain exact installation and test requirements.

Package Contents and Separate Requirements

This offer identifies the rectifier/diode service component. Transformer, logic board, complete power supply, enclosure and harness are separate unless expressly bundled. Confirm the current component and mounting pieces. A component rating is not a specification for an entire power supply, and this part does not by itself perform a complete voltage conversion for another operator.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Preserve the rectifier terminal polarity and approved mounting. Do not infer connections from a similar diode case or bypass circuit protection.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

Does 400V mean the operator accepts 400V supply?

No. Follow the operator nameplate and wiring requirements.

Is it the MAXUM K41-0380-000 rectifier?

No. These are different service references.

Can ratings alone establish a substitute?

No. Circuit function, terminal arrangement and installation requirements also matter.

Will it repair every power fault?

No. Diagnose the supply and connected circuit first.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products