LiftMaster K25-2008 Overload Service Component — 8A

LiftMaster K25-2008 Overload Service Component — 8A

$20.12
Skip to product information
LiftMaster K25-2008 Overload Service Component — 8A

LiftMaster K25-2008 Overload Service Component — 8A

K25-2008
$20.12
Shipping calculated at checkout.

The LiftMaster K25-2008 is the 8A overload service reference identified in manufacturer parts literature. It is a protective electrical component selected by the exact operator, motor circuit and installed overload arrangement rather than by matching a relay case or current number alone. It must not be confused with an ordinary fuse or the 30A switching relays used elsewhere in operator controls. A tripping overload may be responding to a genuine motor, supply or mechanical problem, so the cause must be diagnosed before replacing the protective component.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Operator circuits specifying K25-2008 Match exact installed overload and motor requirements.
8A designation Not approval for every 8A circuit.
Other overload ratings Do not increase the rating to suppress trips.
30A relay components Different function and selection requirements.
Recurring overload trips Require supply, motor and mechanical diagnosis.

Find the Cause of Tripping Before Replacing Protection

Record the operator, motor and overload markings and preserve any useful fault history before service. Have qualified personnel inspect the supply, connections, motor condition and driven load. A door that binds, a brake that does not release or a damaged motor can cause repeated trips even when the overload itself is functioning correctly. Replacing protection without correcting the cause can leave the equipment unsafe or unreliable.

Match the replacement to the exact circuit diagram and current supplied instructions. Do not bridge the overload, increase its rating or assume a different component with a similar terminal layout provides the same protection. After repair, verify the intended protective and operating functions under the manufacturer procedure. Restore the enclosure and complete the required travel and safety checks before returning the equipment to normal use.

Specifications and Product Identification

Specification Details
Part number K25-2008
Product Overload service component
Current designation 8A
Selection basis Exact motor circuit and operator diagram
Separate products Fuses and switching relays
Reset / adjustment details Confirm delivered component instructions

Before Ordering

  • Record full operator, motor and overload labels.
  • Confirm K25-2008 and 8A requirement.
  • Diagnose trips and inspect wiring and mechanical load.
  • Verify exact mounting, connections and protective-function tests.

Package Contents and Separate Requirements

This offer identifies the K25-2008 overload service component. A motor starter, contactor set, fuse package, logic board, complete wiring harness and electrical enclosure are not promised as included. Confirm the current supplied component and any mounting pieces. The rating does not make it a complete replacement for every protective device in the control box; identify each damaged part separately through the correct operator circuit and repair information.

Safety Warnings — Read Before Installation or Service

  • WARNING: Overload service involves hazardous electrical circuits and motor protection. Use qualified electrical and operator-service personnel.
  • Isolate all applicable supplies before touching terminals or removing the component. Secure the driven equipment against movement.
  • Never bypass an overload or increase its rating to stop nuisance trips. Diagnose and correct the underlying fault.
  • Restore covers and verify protective function, normal operation and all required safety responses before use.

Related Products and Important Differences

Frequently Asked Questions

Is it an ordinary fuse?

No. The manufacturer identifies an overload service component.

Can I use a higher rating to stop trips?

No. Preserve the specified motor-protection requirements.

Does a trip prove the overload is bad?

No. The device may be responding to a genuine fault.

Is a complete motor starter included?

No. This offer identifies the individual service component.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products