LiftMaster K17-2001 Barrier Operator Pulley — 8-Inch Diameter, 5/8-Inch Bore, 4L Belt
The LiftMaster K17-2001 is the pulley identified with an 8-inch diameter, 5/8-inch bore and 4L belt profile for the documented BG770 and BG790 barrier-operator drive arrangement. Select it by the complete service reference and actual pulley configuration. The 4L designation describes the belt profile, not its length, and matching the shaft bore alone does not establish a complete drive match. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| BG770 / BG790 | Verify the pulley callout in the applicable drive drawing. |
| Belt selection | Confirm the separately specified belt length and profile. |
| Shaft attachment | Check bore, hub and retention arrangement. |
| Other pulleys | Do not change ratio or use another diameter without an approved specification. |
Identify the Assembly and Plan the Repair
The pulley must align with its mating pulley and fit within the documented drive adjustment and guarding arrangement. Inspect the belt grooves, shaft attachment and supports before selecting a replacement. Belt slip or noise can come from wear or misalignment elsewhere rather than the pulley alone.
Barrier equipment can retain balancing loads even after electrical power is isolated. Have qualified personnel secure the arm and drive before removing transmission parts. Obtain any unstated hub or keying dimensions from the exact service information and restore the approved belt adjustment rather than increasing tension to conceal mechanical resistance.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K17-2001 |
| Pulley diameter | 8 inches |
| Bore | 5/8 inch |
| Belt profile | 4L |
| Documented platforms | BG770 / BG790; exact configuration must match |
Before Ordering
- Record the full barrier operator and drive arrangement.
- Verify 8-inch diameter, 5/8-inch bore and 4L profile.
- Check belt length, alignment and retention separately.
- Inspect the cause of pulley or belt wear before installation.
Package Contents and Separate Requirements
This offer identifies the pulley service component. A belt, shaft key, retention hardware, motor, reducer and complete barrier operator are not established as included. Confirm the current pulley package and obtain other worn drive parts separately where the service inspection requires them.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed barrier operator pulley — 8-inch diameter, 5/8-inch bore, 4l belt can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Secure the barrier arm and stored balancing loads before drive service. Restore the specified pulley alignment, belt adjustment and guarding rather than increase force or tension to conceal binding.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Does 4L mean a four-inch belt?
No. It is the belt profile; length is a separate selection from the actual drive specification.
Will a matching bore prove fit?
No. Diameter, hub geometry, retention, belt profile and alignment must also match.
Is a belt included?
No belt is established as included. Confirm the current pulley package before ordering separate drive parts.
Can another diameter improve operator capacity?
No capacity conversion is established. Use the approved pulley and complete drive ratio for the installed operator.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.