LiftMaster K10-36395 Battery Tray — Verify CSW24 / RSW12 Arrangement and Capacity

LiftMaster K10-36395 Battery Tray — Verify CSW24 / RSW12 Arrangement and Capacity

$82.79
Skip to product information
LiftMaster K10-36395 Battery Tray — Verify CSW24 / RSW12 Arrangement and Capacity

LiftMaster K10-36395 Battery Tray — Verify CSW24 / RSW12 Arrangement and Capacity

K10-36395
$82.79
Shipping calculated at checkout.

The LiftMaster K10-36395 is the battery-tray service reference shown in documented CSW24 and RSW12 operator arrangements. The supplier uses a 33Ah battery-tray description, but that wording alone does not establish an approved battery capacity for every listed operator revision. Confirm the exact tray, battery dimensions and manufacturer-approved configuration before ordering or changing the battery installation. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
CSW24 arrangements Match the tray reference and approved battery layout.
RSW12 arrangements Verify the exact generation and battery compartment.
33Ah batteries Supplier label does not establish universal approved fit.
Other tray references Do not interchange by battery capacity wording alone.

Identify the Assembly and Plan the Repair

The tray is a mechanical support, while battery selection also depends on the operator’s electrical system, charging provisions and approved accessories. Check the full model suffix, installed tray, battery dimensions, securement and cable routing. A battery that physically rests on a tray is not automatically approved for the operator or supported by its charger.

If the installation is being upgraded rather than repaired like for like, obtain the manufacturer’s complete battery arrangement first. Do not enlarge the installation based only on the supplier’s 33Ah wording. Inspect the compartment for corrosion or damaged mounting points and confirm that the final layout preserves covers, electrical clearances and service access.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference K10-36395
Component Battery mounting tray
Documented families CSW24 / RSW12; verify complete model
Supplier capacity label 33Ah; requires application confirmation
Electrical function Mechanical support; not a charger or battery

Before Ordering

  • Identify the full CSW24 or RSW12 model.
  • Confirm K10-36395 in its exact parts drawing.
  • Verify approved battery capacity, dimensions and securement.
  • Inspect tray supports, cables and compartment condition.

Package Contents and Separate Requirements

This is the tray service item. Batteries, charger, battery harness, complete backup system and any optional conversion hardware are separate unless explicitly bundled. Confirm required brackets and retaining pieces with the current supplier package. No backup runtime or universal 33Ah compatibility is promised by a tray-only listing.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving gate and exposed battery tray — verify csw24 / rsw12 arrangement and capacity can cause serious injury. Installation and service require a qualified gate-systems technician.
  • Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
  • Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
  • Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.

Related Products and Important Differences

  • LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
  • LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.

Frequently Asked Questions

Does this include a battery?

No battery is established as included.

Does the supplier’s 33Ah label guarantee fit?

No. Confirm the approved arrangement for the exact operator.

Will it increase backup runtime by itself?

No. A tray provides support and adds no electrical capacity.

Can I transfer another tray’s compatibility?

No. Use K10-36395 and the actual operator drawing.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products