LiftMaster K001A6407-1 RPM Sensor / Encoder Service Board — RSW12V

LiftMaster K001A6407-1 RPM Sensor / Encoder Service Board — RSW12V

$54.63
Skip to product information
LiftMaster K001A6407-1 RPM Sensor / Encoder Service Board — RSW12V

LiftMaster K001A6407-1 RPM Sensor / Encoder Service Board — RSW12V

K001A6407-1
$54.63
Shipping calculated at checkout.

The LiftMaster K001A6407-1 is the RSW12V replacement RPM sensor identified by its model-specific manufacturer installation sheet. Catalogs may call it an absolute-encoder logic board, but the dedicated instructions restrict this replacement to RSW12V gate operators. It is a motion-feedback service component, separate from the main control board and radio receiver. Match the installed sensor assembly and operator before ordering. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
RSW12V Dedicated installation sheet identifies this application.
Other swing-gate operators No universal encoder compatibility established.
K1A6408 APE assembly Different service reference and package; do not substitute by terminology.
Main control board or radio receiver Different circuit functions and service parts.

Identify the Assembly and Plan the Repair

Locate the RPM sensor and associated gear wheel, bracket and harness before purchase. A feedback complaint can involve a loose assembly, damaged wheel or wiring problem as well as the electronic sensor. Inspect those items rather than assuming that a control-board label using the word encoder identifies the same part.

The dedicated instructions address the sensor mounting, gear wheel and correct seating of the assembly. Have the technician follow that procedure and verify operation afterward. Do not assume the package contains a complete main board, every harness or a universal limit system. Any required setup and protection tests remain part of the model-specific repair.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference K001A6407-1
Manufacturer installation-sheet name RPM sensor
Documented application RSW12V gate operators only
Catalog terminology Absolute-encoder logic board
Function Operator motion-feedback service component

Before Ordering

  • Confirm the operator is the documented RSW12V.
  • Match K001A6407-1 on the actual service reference.
  • Inspect wheel, bracket, seating and wiring.
  • Obtain the dedicated instructions and current carton inventory.

Package Contents and Separate Requirements

This offer identifies the RPM-sensor/encoder service reference. Confirm the current carton for its gear wheel, bracket and mounting pieces. The main operator board, radio receiver, complete limit assembly and operator are separate unless expressly included. A catalog description containing logic board does not make this a replacement for the gate’s main control system.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Isolate both power and battery as directed by the RSW12V sensor sheet. Restore correct sensor seating, gear-wheel engagement and harness routing.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

Is this a universal absolute encoder?

No. The dedicated sheet identifies RSW12V operators only.

Is it the main gate control board?

No. It is the documented RPM feedback service component.

Should the gear wheel be inspected?

Yes. The manufacturer procedure addresses the wheel and sensor mounting.

Will replacing it solve every travel fault?

No. Diagnose the mechanical feedback path, wiring and controls first.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products