LiftMaster 71-1541B18LGH Sprocket — 18 Teeth, #41 Chain, 1-Inch Bore
The LiftMaster 71-1541B18LGH is the 18-tooth sprocket service offer for #41 roller chain with a 1-inch bore and1/4-inch keyway designation. Match the complete shaft connection, hub position and approved drive ratio before ordering. A sprocket with the same chain pitch is not automatically interchangeable when its tooth count or bore differs. This listing preserves the supplier SKU separately from any associated manufacturer component reference and does not establish a complete chain-drive kit or permission to change an operator’s gearing.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Drive specifying this exact sprocket | Match shaft position and approved ratio. |
| #41 roller chain | Correct family; inspect length, alignment and wear. |
| 1-inch shaft /1/4-inch keyway | Confirm actual dimensions and hub position. |
| Other tooth counts | Different drive geometry and ratio. |
| Other bore or chain sizes | Not interchangeable based on brand. |
Identify the Chain Family Before Comparing Shaft Dimensions
A sprocket must match both the chain and the shaft. If an old invoice only says 18-tooth sprocket, identify the actual chain family and complete service reference before reordering. The #41 and #50 designations are not alternate names for the same chain. Installing the wrong tooth profile can prevent proper engagement even when the bore slides onto the shaft.
Have the technician inspect the shaft keyway, sprocket teeth, chain and mating drive components together. The new sprocket must occupy the correct chain line and have adequate hub clearance. A worn keyway or loose mounting can remain a problem after the sprocket is replaced. Do not change tooth count to alter operating speed during an ordinary service repair.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Supplier SKU | 71-1541B18LGH |
| Manufacturer component reference | 15-41B18LGH |
| Chain size | #41 |
| Tooth count | 18 |
| Bore | 1 inch |
| Keyway designation | 1/4 inch; confirm retention hardware |
Before Ordering
- Confirm 18 teeth and #41 chain.
- Verify1-inch bore,1/4-inch keyway and shaft condition.
- Match hub position and complete retention arrangement.
- Inspect the mating chain and confirm the approved drive ratio.
Package Contents and Separate Requirements
This offer identifies the 71-1541B18LGH sprocket. Chain, connecting links, shaft, complete key-and-fastener inventory and an operator are not promised as included. Confirm the current supplied package before scheduling the repair. A kit-style supplier number does not establish every surrounding drive component is bundled. If the chain or shaft connection is worn, identify those separate parts rather than assuming a new sprocket alone restores the complete transmission.
Safety Warnings — Read Before Installation or Service
- WARNING: Exposed chain drives can entangle clothing or trap fingers and cause serious injury. Use a qualified door- or gate-systems technician.
- Isolate all applicable power and secure the moving equipment before removing a chain or sprocket.
- Do not enlarge the bore, improvise the shaft connection or substitute a different chain family to make a part fit.
- Restore guards and complete the equipment’s prescribed operating and safety tests before normal use.
Related Products and Important Differences
- #41 roller chain, 10-foot length — a matching chain-family option; determine the required installed length.
- #41 chain master link — a separate connecting component for the appropriate #41 chain; not a #50 link.
Frequently Asked Questions
How many teeth are specified?
18 teeth.
What bore is identified?
1 inch, with a 1/4-inch keyway designation.
Is a complete chain supplied?
No complete chain length is promised with this sprocket.
Can another #41 sprocket replace it?
Only if the exact tooth count, shaft connection and approved drive requirements match.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.