LiftMaster 22416GR 6-Inch Shielded Guide Roller
LiftMaster 22416GR 6-Inch Shielded Guide Roller
The LiftMaster 22416GR is a 6-inch shielded guide-roller assembly for a correctly designed gate-guidance arrangement. LiftMaster identifies commercial-grade non-marring EPDM rubber and a corrosion-protected steel housing. It is a guide component, distinct from a ground-running V-groove wheel, hinge or powered drive assembly. Match the gate geometry, mounting position and required clearances before ordering; the six-inch designation does not establish a universal mounting fit or a gate-weight rating. A new roller cannot correct a bent gate frame, damaged support post or misaligned track.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Gate guidance requiring this assembly | Check the actual gate and mounting geometry. |
| 22413GR 3-inch guide roller | Different size; not a dimensionally equivalent substitute. |
| Separate guide-roller bracket | Confirm whether an additional bracket is needed. |
| V-groove support wheels | Different function and load path. |
| Arbitrary gate-weight applications | No capacity is established solely by nominal roller size. |
Inspect the Complete Gate Guidance Arrangement
A guide roller should work with the gate’s intended alignment and clearances rather than force a distorted gate into position. Inspect the supporting post, mounting points and contacting gate surface before replacement. Uneven wear can indicate an alignment problem or repeated contact outside the intended area. Have a gate professional assess the full travel and determine whether the support arrangement needs repair.
Keep the roller and its shielding correctly positioned so the gate moves freely through the approved path. Do not remove the housing to make an unsuitable installation fit or add excessive pressure to hide lateral movement. The shielded design is only one part of a safe installation. Entrapment zones, end stops, structural support and the operator’s protection devices still require separate evaluation and testing.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | 22416GR |
| Nominal size | 6 inches |
| Product | Shielded guide roller |
| Roller material | Non-marring EPDM rubber |
| Housing | Corrosion-protected steel |
| Offer quantity | Single assembly; confirm package |
Before Ordering
- Record the existing roller reference and nominal size.
- Compare mounting geometry and gate clearances with the product drawing.
- Inspect the support post, gate surface and alignment through full travel.
- Confirm the single-unit package and any separate bracket or fasteners.
Package Contents and Separate Requirements
This offer identifies one 22416GR guide-roller assembly with its described housing. A pair of rollers, support post, complete guide frame, gate, mounting bracket and site-specific anchors are not promised as included. Confirm the current carton and planned mounting method before installation. Select the number of guides and any additional structural hardware from the actual gate design, not from the assumption that one roller completes every installation.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and guide roller can create pinch and entrapment points. Use a qualified gate installer.
- Isolate operator power and secure the gate before loosening guide hardware. Prevent unsupported movement or tipping.
- Preserve required shielding and do not use the roller to compensate for a damaged gate frame, post or track. Keep hands out of the contact area.
- Check free travel, secure mounting, end stops and all required safety devices before reopening the entrance to traffic.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
What material is specified?
LiftMaster identifies non-marring EPDM rubber with a corrosion-protected steel housing.
Is it a V-groove support wheel?
No. It is a guide roller for the specified guidance arrangement.
Does the six-inch size establish gate capacity?
No. Evaluate the complete mounting and gate design.
Does its shielding make the entire gate safe?
No. The complete installation and all hazards still require assessment.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.