LiftMaster 18-11379 Hoist Compression Spring — H / HJ Service
The LiftMaster 18-11379 identifies the hoist compression spring listed in the documented H and HJ commercial-door operator service information. This is an internal operator spring, separate from the building door’s counterbalance springs and from other clutch or disconnect springs shown in the same parts drawings. Match the exact spring callout rather than selecting by a similar coil appearance. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Matching H / HJ service arrangement | Confirm 18-11379 at the correct hoist callout. |
| Clutch spring | Separate reference and mechanical role. |
| Disconnect spring | Separate reference; do not substitute by appearance. |
| Door counterbalance system | This internal operator spring is not a door spring. |
Identify the Assembly and Plan the Repair
Identify where the spring operates in the hoist mechanism and inspect its adjoining parts before choosing a replacement. A broken or displaced spring may accompany worn attachment features or another fault. Compare the actual spring location with the exact operator diagram and obtain the approved current part rather than infer rate, length or wire size from the name.
A diagram callout number or supplier image label does not establish a multi-pack quantity. Confirm the current supplied spring count and any retaining hardware separately. Have a trained door technician secure the door and isolate the operator before working around the hoist mechanism, then verify the required manual and powered operating functions after the repair. The spring does not remedy an unbalanced or damaged door.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | 18-11379 |
| Component | Hoist compression spring |
| Documented context | H / HJ operator hoist arrangement |
| Separate clutch spring | 18-10168 in the researched parts list |
| Separate disconnect spring | 18-10931 in the researched parts list |
Before Ordering
- Record the full H / HJ model and service revision.
- Locate the hoist compression spring callout.
- Distinguish clutch, disconnect and door counterbalance springs.
- Confirm current quantity, retention and service procedure.
Package Contents and Separate Requirements
This offer identifies the hoist compression-spring service component. A complete hoist mechanism, clutch spring, disconnect spring, door counterbalance spring set, release chain and operator are not established as included. Confirm the supplied count; an illustration number is not evidence of a five-piece package.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving commercial door and exposed hoist compression spring — h / hj service can cause serious injury or death. Have a trained door-systems technician perform installation and service.
- Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
- Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
- Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Is it a garage-door counterbalance spring?
No. The researched part identity is an internal operator hoist compression spring.
Is it the clutch spring?
No. The researched drawing gives the clutch spring a separate reference.
Does a numbered illustration mean that many springs are supplied?
No. Confirm current package quantity independently of diagram callouts.
Can it correct poor door balance?
No. A trained technician must address door and counterbalance faults separately before normal operation.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.