SSC .2625" × 2.00" ID × 31.50" Torsion Spring – RW – Blue
SSC .2625" × 2.00" ID × 31.50" Torsion Spring – RW – Blue
🇺🇸 Made in USA
The Service Spring Corp .2625" × 2.00" ID × 31.50" right-wind torsion spring is a replacement counterbalance component for garage door systems requiring these exact specifications. It works through the torsion shaft and cable drums to help balance the door’s weight throughout its operating travel.
This spring is manufactured from coated, oil-tempered wire and supplied with winding and stationary cones installed. Blue wire-size identification corresponds to .2625" wire, while the complete dimensional specification and right-hand wind provide the information needed for accurate replacement selection.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Service Spring Corp |
| Spring type | Garage door torsion spring |
| Wire diameter | .2625" |
| Inside diameter | 2.00" |
| Spring body length | 31.50", relaxed, excluding cones |
| Wind direction | Right wind — RW |
| Wire-size color code | Blue |
| Material | Oil-tempered spring wire |
| Surface treatment | Protective coating |
| Included components | Installed winding and stationary cones |
| Listed cycle rating | Minimum 10,000 cycles in the correct application |
| Country of manufacture | USA |
| Quantity | One spring |
Construction & Included Components
Oil-tempered wire forms the working spring body that stores and releases energy during door operation. The protective coating helps protect its surface, but does not remove the need for appropriate inspection and maintenance.
Installed winding and stationary cones provide the connections used to tension and anchor the spring. Their compatibility with the intended shaft and mounting arrangement must still be confirmed.
This listing supplies one spring with cones. Lift cables, drums, bearings, support brackets, torsion shaft, and service tools are separate components of the complete counterbalance assembly.
Common Applications
Intended for professional sectional garage door replacement where the approved specification is .2625" wire × 2.00" inside diameter × 31.50" body length, right wind.
Door width, panel appearance, and opener horsepower do not establish the correct spring. Actual weight and lift geometry determine the counterbalance requirement. If the door has received additional insulation, reinforcement, or replacement sections, the installer should account for those changes before duplicating the previous spring.
Compatibility & Measurement
Match wire diameter, inside diameter, relaxed coil body length, and wind direction. The 31.50" length excludes the winding and stationary cones and refers to the spring in its fully relaxed condition.
The 2.00" inside diameter describes the spring coil opening rather than the shaft diameter. Check cone fit, anchor mounting, shaft compatibility, and sufficient operating clearance separately.
This spring should not be treated as interchangeable with a .2625" × 2.00" ID spring measuring 33.50", 37.00", or 40.00". Although wire size and coil diameter match, changing body length changes spring rate and requires evaluation against the door’s requirements.
Wind Direction & Color Identification
Right wind identifies the direction of the coils. The proper mounting position must be established from the actual torsion system configuration.
Blue identifies .2625" torsion spring wire. Do not confuse it with the light-blue identification used for .2830" wire. Color supports identification, but does not replace measurements or establish a door lifting capacity.
Pairing & Door Configuration
For a two-spring assembly, the technician should evaluate both springs and their combined output. Replacing both may be appropriate when their age, wear, and operating history are similar.
A properly engineered pair may use different spring dimensions. Door weight, travel height, cable drum geometry, and standard-, high-, or vertical-lift configuration determine the correct combination. A proposed substitution should be calculated for the complete system rather than selected by visual similarity.
Cycle Life & Maintenance
The listed minimum rating is 10,000 cycles in the correct application. Each complete opening and closing counts as one cycle. Frequency of use, environmental exposure, maintenance, and surrounding hardware condition affect service duration.
Follow manufacturer lubrication guidance. Heavy operation, uneven movement, or unusual noise should prompt professional inspection rather than increased opener force.
Professional Installation & Safety
Removal, installation, and tensioning require a qualified garage door professional using suitable equipment. Never loosen loaded cones, spring anchors, cable drums, or bottom cable brackets.
After replacement, have cable condition, bearings, mounting hardware, door balance, and opener safety functions checked before returning the door to service.
Order this spring for a verified .2625" × 2.00" ID × 31.50" right-wind application.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection
