SSC .2070" × 2.00" ID × 24.00" Torsion Spring – RW – Yellow
SSC .2070" × 2.00" ID × 24.00" Torsion Spring – RW – Yellow
🇺🇸 Made in USA
Replace a matching right-wound garage door spring with this SSC torsion spring. It combines .2070" wire, a 2.00" inside diameter, and a 24.00" relaxed spring-body length, with winding and stationary cones already installed.
Manufactured from coated, oil-tempered wire, this spring works within a correctly sized counterbalance assembly to offset door weight. Proper selection supports controlled movement throughout the opening and closing cycle and helps the opener operate a balanced door.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | SSC — Service Spring Corporation |
| Spring type | Garage door torsion spring |
| Wire diameter | .2070" |
| Inside diameter | 2.00" |
| Relaxed spring-body length | 24.00", excluding cones |
| Wind direction | Right wound — RW |
| Wire-size color code | Yellow |
| Wire construction | Oil-tempered spring wire |
| Finish | Protective coating |
| Installed fittings | Winding cone and stationary cone |
| Standard cycle rating | Minimum 10,000 cycles in a correctly selected application |
| Country of manufacture | United States |
| Package quantity | One torsion spring with installed cones |
Construction & Package Contents
The oil-tempered wire provides the spring material for repeated torque loading. The coating helps protect its surface while remaining subject to environmental exposure and normal maintenance requirements.
The winding and stationary cones are installed. Cone installation does not remove the need to verify shaft fit and anchor compatibility or make spring replacement a homeowner task.
This listing includes one right-wound spring with cones. An opposite-wind spring, shaft, cable drums, cables, bearings, brackets, and winding tools are separate items.
Common Uses
For professional replacement of a matching spring on a sectional garage door or use in a professionally calculated spring combination.
The spring should not be selected from door width, opener horsepower, or color alone. Actual door weight, travel height, cable drum geometry, and the full spring arrangement determine the required counterbalance.
Compatibility: Match the Complete Specification
Match .2070" wire diameter, 2.00" inside diameter, 24.00" relaxed body length, and right-hand wind before ordering.
This spring is not automatically interchangeable with a 20.00", 22.00", or 25.00" spring using the same wire diameter and ID. Changing body length changes the spring rate, so replacement selection must account for balance through the door’s travel.
A .2070" spring with a 1.75" ID is also a different configuration and requires a sizing check before substitution.
The listed length excludes both cones and refers to the relaxed coil body. A measurement taken from a spring under installed winding tension may not represent its original length. Have a qualified technician confirm measurements safely.
The spring’s inside diameter is not the shaft diameter. Verify cone bore, shaft fit, stationary mounting, and available installation space separately.
Yellow Wire Code & Right-Hand Wind
Yellow is the wire-size identification color. RW identifies the direction of the spring coil. Neither marking establishes installation side or a universal lifting capacity.
This is a torsion spring, so its yellow marking must not be interpreted using extension-spring weight-color conventions. Confirm the actual wire diameter and wind. A left-wound spring of the same dimensions is not an interchangeable replacement.
Pairing, Drums & System Changes
For a two-spring door, have both springs inspected and their specifications confirmed. Springs with similar age and usage may warrant replacement together, but the correct pair must meet the door’s combined counterbalance requirements.
The engineered combination may use matching or different dimensions. Added insulation, overlays, replacement sections, different drums, or changes in lift configuration can require new calculations. High-lift and vertical-lift systems need application-specific sizing.
Cycle Rating & Maintenance
The standard minimum rating is 10,000 cycles in a correctly selected application. One cycle equals one complete opening and closing. Actual lifespan depends on usage, environment, maintenance, and operating conditions.
Follow the door manufacturer’s inspection and lubrication recommendations. Arrange service if the door becomes heavy, moves unevenly, or develops unusual noise. Do not increase opener force to mask poor balance.
Installation & Safety
For qualified professional installation only. Torsion springs and loaded cable systems can release dangerous energy. Never loosen loaded cones, drums, anchors, or bottom cable brackets, and never use improvised winding tools.
Keep a door with a broken spring out of operation. The completed repair should include inspection of supporting hardware, door-balance verification, cable checks, and testing of opener safety functions.
Choose this SSC right-wound spring after confirming the exact 24.00" body length, .2070" wire, 2.00" ID, and complete application requirements.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection
