Genie 25648R / 20285R.S 12-Switch Internal Receiver Board – 390 MHz Fixed-Code Replacement

Genie

Fast shipping — same-day on orders before 4:30 PM EST

Genie 25648R / 20285R.S 12-Switch Internal Receiver Board – 390 MHz Fixed-Code Replacement

Product Description

The Genie 25648R / 20285R.S Internal Receiver Board is a replacement radio receiver for select older Genie garage door openers equipped with a 12-position DIP-switch system.

This receiver operates at 390 MHz and uses 12 binary ON/OFF code switches. The DIP-switch pattern inside the receiver must be set to match the code pattern inside the compatible remote control.

With 12 binary switches, the receiver supports up to 4,096 possible fixed-code combinations. It is intended for older fixed-code Genie systems and does not use Intellicode or rolling-code technology.

Product Specifications

• Product type: Internal garage door opener receiver board
• Manufacturer: Genie
• Original part number: 25648R
• Replacement part number: 20285R.S
• Receiver type: Fixed code
• Frequency: 390 MHz
• Code configuration: 12 binary ON/OFF DIP switches
• Available code combinations: Up to 4,096
• Input power: 24V AC/DC
• Approximate dimensions: 4.375 inches × 2.25 inches
• Antenna type: Wire antenna
• Installation location: Inside the garage door opener powerhead

Compatible Genie Garage Door Openers

The 20285R.S replacement receiver is listed for use with select Genie opener models, including:

• G2500
• G5000
• G5050
• G5500
• G5700
• G8000
• GX9000
• GXL9500
• GXL9550
• GXL10000
• CM7500S
• CM8500S

Compatibility should always be confirmed by matching the existing receiver part number, operating frequency, DIP-switch count, mounting configuration, and opener model.

Compatible Remote Types

This receiver is designed to work with compatible Genie and Overhead Door 390 MHz fixed-code transmitters that use a matching 12-switch code configuration.

Common compatible remote families may include:

• Genie GPT90-series remotes
• Genie GT90-series remotes
• Genie GT912 remote
• Genie MAT90 remote
• Compatible Genie 9/12-switch wireless keypads

A remote must operate at 390 MHz and support the receiver’s 12-switch fixed-code system. Matching only the brand name is not enough to confirm compatibility.

Important Matching Notes

This is a 12-position binary DIP-switch receiver. It should not be confused with:

• Genie 9-switch receivers
• Genie 12-switch trinary-code systems
• Genie Intellicode receivers
• Overhead Door CodeDodger receivers
• Learn-button or rolling-code receivers
• Modern Wi-Fi receiver systems

Before ordering, inspect the existing receiver and remote. Confirm that the system operates at 390 MHz and uses 12 matching ON/OFF DIP switches.

The replacement board’s mounting points, electrical connection, antenna placement, and physical dimensions should also be compared with the original board.

How the DIP-Switch Code Works

The receiver contains 12 small code switches. A compatible remote contains a corresponding set of switches or an electronic programming mode that reproduces the same code.

For proper operation, the code position in the remote must match the receiver’s code exactly. Any difference between the two code patterns can prevent the opener from responding.

For improved security, avoid leaving every switch in the same position or using an easily guessed pattern.

Package Contents

• One Genie 20285R.S replacement internal receiver board
• Wire antenna attached or provided as part of the receiver assembly

Remote controls, wiring, mounting hardware, and other opener components are not included unless specifically shown or stated with the product.

Installation Notes

Disconnect electrical power to the garage door opener before opening the powerhead or removing the existing receiver board.

Document the original wire locations and DIP-switch settings before disconnecting the old receiver. Install the replacement board in the same orientation and reconnect the wiring according to the opener’s service information.

After installation, set the receiver’s DIP switches to the desired code and match the same code on every compatible remote control.

Professional installation is recommended when the opener’s wiring, voltage, receiver type, or mounting arrangement cannot be positively identified.

Safety Warning

Garage door openers contain electrical components and moving mechanical parts. Disconnect power before servicing the operator.

After installation, test the door’s travel limits, force settings, emergency release, photoelectric safety sensors, and automatic-reversal system. Do not operate the opener if any required safety device is damaged, missing, or not working correctly.

 Genie 25648R 20285R.S 12-Switch Receiver Board – 390 MHz

 Genie 25648R and 20285R.S 12-switch internal receiver board for select older Genie garage door openers. Fixed-code 390 MHz replacement receiver.