Miller Edge RBand RB-G-K10 Monitored Wireless Gate Edge Kit – Transmitter & Receiver

The Miller Edge RBand RB-G-K10 is a monitored wireless safety-edge system designed to eliminate the need for a hard-wired connection between a moving gate sensing edge and the gate operator.

The system includes an RB-TX10 wireless edge transmitter and RB-G-RX10 receiver. The transmitter connects to a compatible Miller Edge 10K resistive monitored sensing edge, then wirelessly communicates edge status to the receiver mounted at the gate operator.

Designed for modern UL 325 gate systems, RBand provides a reliable monitored connection while reducing the need for coil cords, retractable cable reels, or other moving wired connections.

Product Features

• Monitored wireless gate sensing-edge system

• Includes transmitter and receiver

• Eliminates moving hard-wire connection between edge and operator

• Designed for compatible 10K resistive monitored sensing edges

• Receiver provides 10K and Normally Closed monitored output options

• 2-channel receiver

• Supports up to 3 transmitters per channel

• Supports up to 6 transmitters total

• Nominal wireless range up to approximately 50 ft

• Bi-directional wireless communication

• Automatic RF channel selection

• Auto-adjusting transmitter power helps improve signal reliability

• On-board diagnostic LEDs for setup and troubleshooting

• Low-battery monitoring output

• Designed for rugged outdoor gate environments

• UL 325 Recognized Component

• 2-year manufacturer warranty

Specifications

• Manufacturer: Miller Edge

• System: RBand

• Model: RB-G-K10 / RBGK10

• Receiver: RB-G-RX10

• Transmitter: RB-TX10

• Sensing Edge Input: 10K Resistive Monitored Edge – T2 / Blue Band

• Receiver Outputs: 10K Monitored / Normally Closed Monitored

• Receiver Channels: 2

• Maximum Transmitters: 6 Total

• Transmitters per Channel: Up to 3

• Nominal Wireless Range: Approximately 50 ft

• Receiver Power: 12/24 VAC or VDC

• Transmitter Power: 2 × 3.6V AA Lithium Batteries

• Application: Automated Vehicular Gates

• Safety Recognition: UL 325 Recognized Component

How It Works

The sensing edge connects directly to the RB-TX10 transmitter mounted on the moving gate.

When the sensing edge is activated, the transmitter communicates wirelessly with the RB-G-RX10 receiver installed at the gate operator.

The receiver then sends the appropriate monitored signal to the operator's safety-edge input.

This eliminates the need to run a moving electrical cable between the gate and stationary operator.

10K & Normally Closed Operator Compatibility

The RB-G-RX10 receiver provides connections for:

• 10K monitored operator inputs

• Normally Closed monitored operator inputs

This allows the system to work with many different UL 325 gate operators when properly configured.

Compatibility depends on the exact gate operator and its monitored entrapment-protection input.

Compatible Sensing Edge

The RB-TX10 transmitter is designed for a:

Miller Edge 10K Resistive Monitored Sensing Edge – T2 / Blue Band termination

The sensing edge is not included with this kit unless specifically stated otherwise.

Always verify the edge termination type before ordering.

Multiple Edge Capability

The two-channel receiver can support:

• Up to 3 transmitters on Channel 1

• Up to 3 transmitters on Channel 2

• Up to 6 transmitters total

Additional RB-TX10 transmitters are sold separately.

This makes the system useful for gates requiring multiple monitored sensing edges on leading, trailing, or other entrapment zones.

Improved RF Reliability

RBand uses bi-directional communication between the transmitter and receiver.

During programming, the receiver searches for a suitable RF channel, while automatic transmitter power adjustment helps maintain reliable communication in environments with radio interference.

This makes the system particularly useful in commercial gate installations where other wireless equipment may be present.

Common Applications

Ideal for:

• Sliding gates

• Swing gates

• Commercial automated gates

• Industrial gates

• Parking facility gates

• Apartment and HOA gates

• Warehouse entrances

• Secured commercial facilities

• Vehicle access-control systems

UL 325 Applications

The RBand system is designed for monitored entrapment-protection applications and is particularly suited for gate operators manufactured to UL 325 requirements after January 2016.

The system is a UL 325 Recognized Component when installed with compatible equipment according to Miller Edge instructions.

Package Contents

Includes:

• 1 – Miller Edge RB-TX10 RBand Transmitter

• 1 – Miller Edge RB-G-RX10 RBand Receiver

• 1 – Receiver Antenna

• 2 – 3.6V AA Lithium Batteries

• 4 – Transmitter Mounting Screws

Additional Items Required

Depending on the installation, additional components may be required, including:

• Compatible Miller Edge 10K monitored sensing edge

• Exterior antenna coaxial cable

• Female-to-female coaxial bulkhead adapter

• Receiver mounting hardware

• Operator wiring

These components are sold separately unless specifically stated otherwise.

Important Compatibility Note

Before ordering, verify:

• Gate operator model

• Operator monitored-edge input type

• Sensing-edge termination

• Available 12/24VAC or VDC power

• Number of sensing edges required

• Installation distance and RF conditions

Do not assume compatibility based only on the gate operator brand.

Important Safety Information

This system is part of an entrapment-protection system and must be professionally installed and tested.

After installation, activate every connected sensing edge and confirm that the gate operator stops and/or reverses as required.

Never bypass or disable required monitored safety devices.