Miller Edge MIM-62 Multi-Input Module for Monitored Safety Devices

Product Description

The Miller Edge MIM-62 Multi-Input Module is designed to connect multiple monitored entrapment-protection devices to a compatible commercial door or gate operator.

The module accepts up to six monitored safety-device inputs and combines them into one or two operator outputs. This allows installers to connect multiple monitored photo eyes, sensing edges, or other compatible safety devices when the operator does not provide enough independent monitored inputs.

The MIM-62 supports several commonly used monitored signaling formats, making it suitable for professional commercial door and automated gate installations that require additional UL 325-compliant entrapment-protection devices.

Key Features

• Miller Edge model MIM-62
• Connects up to six monitored safety devices
• Provides two configurable monitored outputs
• Supports open-direction and close-direction safety devices
• Compatible with multiple monitored signal formats
• Individual input-status LED indicators
• Output-status and power indicators
• Compact steel enclosure
• UL 325 Recognized Component
• Designed for commercial door and automated gate safety systems

Input and Output Configuration

The MIM-62 provides:

• Six monitored device inputs
• Two monitored operator outputs
• Input assignment between Output A and Output B
• Flexible configuration for open and close safety zones

Input Channels 1 and 2 are assigned to Output A. The remaining inputs may be assigned to either Output A or Output B using the module’s configuration switches.

All six inputs do not have to be used. However, the connected devices must be monitored devices compatible with the module’s supported signaling formats.

Supported Monitored Interfaces

The MIM-62 accepts commonly used monitored-device interfaces, including:

• 10K resistive monitoring
• Normally closed monitoring
• Two-wire pulsed signals
• Four-wire pulsed signals

The outputs may be configured for compatible pulsed or relay-type operator inputs, depending on the operator and installation requirements.

Common Applications

The Miller Edge MIM-62 may be used with compatible:

• Commercial sectional door operators
• Rolling door operators
• Industrial overhead door operators
• Sliding gate operators
• Swing gate operators
• Barrier gate operators
• Vertical lift gate systems
• Bi-fold gate systems
• Other UL 325-compliant automated access systems

Typical connected devices may include monitored photo eyes, monitored sensing edges, wireless edge receivers, and other compatible entrapment-protection devices.

Electrical Specifications

• Power input: 10–24 VAC or VDC
• Current consumption: Up to approximately 100 mA
• Relay rating: 1 amp at 24 VDC
• External device power: Pass-through from the incoming supply
• Response time: Approximately 100 milliseconds
• Wake-up time: Less than 500 milliseconds

The power supply must provide sufficient current for the MIM-62 and all safety devices receiving power through the module.

Physical Specifications

• Width: 4 inches
• Height: 4.75 inches
• Depth: 1 inch
• Weight: Approximately 6.7 ounces
• Housing material: Steel
• Operating temperature: -40°F to 135°F

Specifications are based on current Miller Edge manufacturer information.

Compatibility

The MIM-62 is designed for operators that accept compatible monitored safety-device signals.

Before ordering, confirm:

• Operator manufacturer and model
• Operator monitored-input requirements
• Safety-device signaling type
• Required number of open and close safety inputs
• Available accessory voltage and current
• Applicable UL 325 installation requirements

The MIM-62 does not make a non-monitored safety device monitored. Non-monitored devices are not compatible unless an approved interface device is used.

Package Contents

• One Miller Edge MIM-62 Multi-Input Module

Photo eyes, sensing edges, wireless transmitters, receivers, power supplies, wiring, mounting hardware, and operator-control accessories are not included unless specifically stated in the product listing.

Installation Notes

Installation requires identification of each connected device’s monitoring method and the operator’s required input format.

The installer must correctly configure:

• Input device type
• Input-to-output assignment
• Output signal type
• Operator terminal connections
• Accessory power requirements

Incorrect configuration may prevent the operator from functioning or may disable required entrapment-protection equipment.

Installation should be completed by a qualified commercial door or automated gate technician familiar with UL 325 monitored safety systems.

Safety Warning

This module is part of an entrapment-protection system and must not be used to bypass, disable, or replace required safety devices.

After installation, every connected photo eye, sensing edge, and operator safety function must be individually tested. The door or gate should not be placed into service until all monitored devices operate correctly and the complete system complies with the operator manufacturer’s instructions and applicable safety standards.

SEO Title: Miller Edge MIM-62 Multi-Input Module for Monitored Safety Devices

Meta Description: Miller Edge MIM-62 Multi-Input Module connects up to six monitored photo eyes, sensing edges or safety devices to one or two commercial door or gate operator inputs.