Linear MegaCode Wireless Garage Door & Gate Keypad – Backlit Keyless Entry

Product Description

Enter your garage or operate a compatible gate without carrying a handheld remote. The Linear MegaCode Wireless Keypad provides convenient access using a personal code entered directly on its illuminated buttons.

Designed for compatible MegaCode receivers, including Linear garage door openers and APeX-equipped gate operators, this wall-mounted keypad offers wireless installation and straightforward programming. It is the replacement keypad listed for the older LPWKP-G.

Key Features & Benefits

• Personalized access: Choose a one- to six-digit PIN or a corresponding letter-based code.

• Multiple-receiver capability: Program access to more than one compatible MegaCode receiver.

• Wireless installation: Battery power eliminates control wiring between the keypad and opener.

• Blue backlighting: Illuminated keys make nighttime entry easier.

• Protective hinged cover: Shields the buttons when the keypad is closed.

• Convenient repeat operation: After successful activation, the operating button remains usable for up to 30 seconds without re-entering the code.

• Compatible opener-light control: Supports overhead light operation on compatible openers, subject to the manufacturer’s operating conditions.

• Replaceable batteries: Uses three AAA alkaline batteries.

• Mounting hardware supplied: Includes two screws and anchors.

• One-year limited manufacturer warranty.

Specifications

Common Uses

• Adding exterior code access to a compatible Linear opener.

• Replacing an older compatible LPWKP-G keypad.

• Entering the garage after walking, cycling, or working outside.

• Providing authorized users with access without additional handheld remotes.

• Operating compatible garage and gate receivers from one keypad.

Compatibility & Fitment

Use with compatible Linear MegaCode receivers, including supported Linear garage door openers and APeX-equipped gate operators.

This is not a universal keypad. Confirm that the installed opener or receiver supports MegaCode before ordering. Linear has produced several radio-control families; a Linear brand label alone does not establish compatibility.

For systems using an external receiver, match the keypad to that receiver rather than relying only on the garage door or gate operator’s brand.

Important Matching Notes

• Check the existing keypad, opener, and receiver information before purchasing.

• Available code storage depends on the receiver; keypad codes may share memory with handheld transmitters.

• Each authorized code must be learned by the intended receiver.

• Wireless reception varies with placement, obstructions, interference, and battery condition.

• The keypad’s batteries power the transmitter only. The opener or gate operator requires its own power supply.

Installation & Programming Notes

Test reception before permanently mounting the keypad. Choose a location with a clear view of the door or gate and safely away from moving equipment.

Follow the supplied instructions and your receiver’s manual to enter Learn mode, transmit the chosen code, and confirm successful operation. Programming and code deletion procedures must match the installed operator.

On supported overhead openers, keypad control of the opener light requires the garage door to be open.

Safety Warning

Keep access codes private and prevent children from playing with the keypad. Operate the door or gate only when the travel path is clear, and watch until movement stops.

Never bypass safety sensors or allow anyone to cross the path of a moving door or gate. Keep batteries away from children and install them with the correct polarity.

Linear MegaCode Wireless Garage Door & Gate Keypad

Add keyless access with a Linear MegaCode wireless keypad featuring blue backlighting, personal PIN entry, and a protective cover. Verify receiver compatibility.