LiftMaster SWG606 Uphill Gate Hinges — Steel with Bronze Bearings, One Pair
The LiftMaster SWG606 is a pair of specialty uphill gate hinges made from steel with bronze bearings. LiftMaster literature identifies a 2,000-pound rating per pair and a flat-mount arrangement for a gate that rises as it swings. Critically, the manufacturer states these hinges are not for use with automatic operators. Select them as part of a properly designed manual gate installation, with the gate structure, supports, slope and control of gravity-driven movement evaluated together. The hinge load rating alone does not establish the suitability of a complete gate.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Properly designed manual uphill gate | Confirm structural capacity, geometry and controlled movement. |
| Automatic gate operators | Excluded by the manufacturer literature. |
| 2,000 lb per pair | Pair rating, not a rating for each individual hinge. |
| Posts, foundations and gate frame | Must independently support the installation loads. |
| Standard level-swing hinge replacement | Not automatically equivalent; uphill movement changes the gate geometry. |
Plan the Gate Rise and Control Unintended Movement
A rising gate changes its clearance and loading as it opens. Have a qualified gate fabricator assess the full swing path, hinge alignment, post condition and gate structure before selecting the hinges. Check the position of the leading edge at several points in travel rather than looking only at the closed position. The attachment design and surrounding supports must be appropriate for the actual gate.
Plan how the gate will be held and handled so it cannot move unexpectedly under gravity or wind. The manufacturer restriction on automatic operators must not be overridden by an assumed benefit of the uphill geometry. If powered operation is required, have the entire gate design reassessed using hardware and an arrangement approved for that purpose. Do not simply attach an operator to a rising manual gate.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Model | SWG606 |
| Product | Specialty uphill hinge pair |
| Quantity | Two hinges / one pair |
| Material | Steel with bronze bearings |
| Manufacturer load rating | 2,000 lb per pair |
| Mounting | Flat mount |
| Application restriction | Not for use with automatic operators |
Before Ordering
- Confirm that the proposed application is a manual gate.
- Check total gate weight against the pair rating and structural design.
- Review slope, full travel clearance and control of gravity-driven movement.
- Confirm attachment details, supplied hardware and maintenance instructions.
Package Contents and Separate Requirements
This offer identifies one pair of SWG606 hinges, consisting of two hinges. A gate leaf, posts, foundations, latch, hold-open device, automatic operator and complete fabrication package are not included. Confirm the current carton for hinge-specific fastening pieces. Welding, structural support and any separate retention or control hardware must be specified for the actual installation; a pair of hinges alone is not a complete safe gate system.
Safety Warnings — Read Before Installation or Service
- WARNING: LiftMaster states SWG606 is not for use with automatic operators. Do not install it as an automatic-gate hinge upgrade.
- A heavy or rising gate can fall or move under gravity and cause serious injury. Support and restrain it throughout installation and service.
- Use a qualified fabricator to evaluate posts, welds, alignment and the complete load path. Do not rely on the hinge rating to approve weak or damaged supports.
- Keep hands and people clear of hinge pinch points and the swing path. Verify controlled manual movement and secure retention before normal use.
Related Products and Important Differences
- LMRRUL monitored photo eye — for separate approved automatic-gate installations; adding a sensor does not make SWG606 suitable for automation.
- LMWEKITU monitored edge kit — a separate automatic-gate accessory, not an approval to use these manual-gate hinges with an operator.
Frequently Asked Questions
Can I use these with an automatic opener?
No. The manufacturer explicitly excludes automatic operators.
Does each hinge support 2,000 pounds?
No. The published rating is per pair.
How many hinges are in this offer?
One pair, or two hinges.
Do the hinges make the whole gate structurally adequate?
No. The gate, posts, attachment and movement control require a complete assessment.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.