LiftMaster Q180 Mechanical Coupling — K07-50199, 1-Inch Outside Diameter

LiftMaster Q180 Mechanical Coupling — K07-50199, 1-Inch Outside Diameter

$32.75
Skip to product information
LiftMaster Q180 Mechanical Coupling — K07-50199, 1-Inch Outside Diameter

LiftMaster Q180 Mechanical Coupling — K07-50199, 1-Inch Outside Diameter

Q180
$32.75
Shipping calculated at checkout.

The LiftMaster Q180 supplier SKU maps to K07-50199, the mechanical coupling identified with a 1-inch outside diameter in manufacturer service information. It appears in the documented RSW12V/RSW12VH arrangement and must match the actual mating components. The 1-inch designation is an outside-diameter description, not proof of a 1-inch bore or universal shaft compatibility. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Documented RSW12V / RSW12VH connection Match the exact service drawing and installed interfaces.
One-inch shafts The listed outside diameter does not establish bore fit.
Q069 or Q074 couplings Different references and applications.
Complete shaft or reducer repair Separate assembly scope; coupling alone does not restore mating damage.

Identify the Assembly and Plan the Repair

Inspect both sides of the coupling connection before ordering. Record the mating shaft arrangement, retention and any visible wear. A small coupling can be damaged by misalignment or abnormal loading, so replacing it without checking the connected components may leave the original cause in place.

Do not transfer bore dimensions, flexible-element construction or torque ratings from another coupling listing. The manufacturer identity establishes the intended service reference, while the exact installed connection determines fit. Follow the model-specific assembly procedure and verify correct alignment and retention before restoring the drive guards.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference Q180
Manufacturer reference K07-50199
Listed dimension 1-inch outside diameter
Documented family RSW12V / RSW12VH
Component Mechanical coupling

Before Ordering

  • Match Q180 to K07-50199.
  • Confirm the one-inch measurement is outside diameter.
  • Inspect both mating interfaces and retention.
  • Verify the full RSW12V/RSW12VH configuration.

Package Contents and Separate Requirements

The listing identifies the coupling service reference. Shafts, reducer, motor, bearings and complete operator are separate unless expressly included. Confirm the current coupling and any supplied retention pieces. A one-inch description does not define a complete dimensional drawing, and a photo of the assembled drive does not establish that adjoining components ship in this order.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving gate and exposed mechanical coupling — k07-50199, 1-inch outside diameter can cause serious injury. Installation and service require a qualified gate-systems technician.
  • Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
  • Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
  • Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.

Related Products and Important Differences

  • LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
  • LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.

Frequently Asked Questions

Is the bore one inch?

The verified one-inch dimension is outside diameter; confirm the actual interfaces.

What manufacturer reference matches Q180?

K07-50199 is the documented mapping.

Is it the Q074 HCT coupling?

No. That is a different service reference.

Will it repair damaged shafts?

No. Mating components require separate assessment.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products