LiftMaster Q096 Header Bracket — HCT / K10-50154
The LiftMaster Q096 is the header bracket identified in legacy HCT overhead gate-operator documentation. It is associated with service reference K10-50154 and must be matched to the installed rail and header mounting arrangement. Select this structural mounting component by the exact service diagram rather than a similar bracket photograph or a shortened operator name. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Legacy HCT | Match Q096 in the applicable mechanical drawing. |
| Rail connection | Check pivot, attachment geometry and clearances. |
| Newer HCT generations | Verify their own service reference; do not assume identical hardware. |
| Door or arm brackets | Separate attachment components are not equivalents to this header bracket. |
Identify the Assembly and Plan the Repair
The header bracket supports the documented rail attachment at the opening. Its mounting surface and surrounding structure must be suitable for the operator installation, so inspect for loose fasteners, distorted material or impact damage before replacing the bracket. A new bracket cannot make an inadequate header attachment safe.
Keep the bracket identification separate from the mounting plate and arm components shown nearby in the HCT drawing. Confirm the current package and any required pivot or retention hardware with the supplier. The installer must follow the exact equipment instructions for alignment and attachment rather than infer anchor requirements from the bracket alone.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | Q096 |
| Legacy reference | Q096 |
| Associated service number | K10-50154; confirm current ordering recommendation |
| Function | Header mounting bracket |
| Documented application | HCT overhead gate-operator arrangement |
Before Ordering
- Identify the complete HCT model and rail configuration.
- Match Q096 and the associated service reference.
- Inspect the header structure and existing mounting points.
- Confirm pivot and attachment hardware supplied or required separately.
Package Contents and Separate Requirements
This offer identifies the Q096 header bracket service item. Confirm the current bracket and hardware package under the associated ordering reference. A complete rail, arm, operator, structural reinforcement and installation anchors are not established as included; those requirements depend on the actual installation.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed header bracket — hct / k10-50154 can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is Q096 the same reference as K10-50154?
It is associated with K10-50154 in HCT service listings. Confirm the current recommendation for the exact installed rail and operator.
Is this the door attachment bracket?
No. The header mounting location has a different role from the bracket attached to the moving door or gate.
Are anchors included?
Do not assume so. The attachment must suit the actual header structure and the approved installation method.
Will it fit every HCT revision?
No universal revision fit is established. Compare the complete model and applicable service drawing before ordering.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.