LiftMaster Q094 Arm Bracket — HCT / K09-50152

LiftMaster Q094 Arm Bracket — HCT / K09-50152

$42.98
Skip to product information
LiftMaster Q094 Arm Bracket — HCT / K09-50152

LiftMaster Q094 Arm Bracket — HCT / K09-50152

Q094
$42.98
Shipping calculated at checkout.

The LiftMaster Q094 supplier reference maps to K09-50152, the arm bracket identified in the HCT overhead-gate parts arrangement. It provides the specified mechanical connection in the gate-arm assembly. It is distinct from the gate arm, arm bushing, header bracket and trolley body, each of which has its own service role and ordering reference. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Documented HCT arm connection Match the service drawing and installed bracket.
Q088 gate arm Separate assembly; not included by the bracket identity.
Q095 arm bushing Separate wear component and ordering decision.
Other gate operators Verify the exact parts list rather than assuming universal bracket fit.

Identify the Assembly and Plan the Repair

Locate the bracket in the correct HCT drawing and inspect the connected arm, pivot and gate attachment. A damaged bracket may accompany wear in the bushing or movement at the gate structure. Identify all affected pieces before purchasing so a bracket-only repair does not leave an unsuitable pivot or distorted attachment in service.

The bracket’s position affects the arm’s path through travel. Restore the documented mounting geometry and check clearance without improvising a new attachment location. The bracket is not structural reinforcement for a weak gate frame. If the attachment area has cracked or distorted, have the underlying structure evaluated before fitting replacement hardware.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference Q094
Manufacturer reference K09-50152
Documented platform HCT overhead-gate arrangement
Component Arm bracket
Nearby separate component Q095 arm bushing

Before Ordering

  • Match Q094 and K09-50152.
  • Identify the correct HCT revision.
  • Inspect arm, bushing and attachment structure.
  • Verify mounting method and separate fasteners.

Package Contents and Separate Requirements

This offer identifies the arm bracket. Gate arm, bushing, trolley body, header bracket, reinforcement and complete operator are separate unless explicitly included. Confirm the supplied fasteners and current carton. Do not interpret a drawing of the assembled arm connection as a promise that all of its pivot and mounting hardware ships with this bracket.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving gate and exposed arm bracket — hct / k09-50152 can cause serious injury. Installation and service require a qualified gate-systems technician.
  • Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
  • Support the overhead gate and arm before loosening pivot or mounting hardware. Keep hands clear of pinch points and do not use the operator to hold an unsupported assembly.
  • Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.

Related Products and Important Differences

  • LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
  • LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.

Frequently Asked Questions

Is this the complete gate arm?

No. The arm and bracket have different service references.

Is the bushing included?

The bushing is separately identified; confirm any bundle explicitly.

Will it fit every gate bracket location?

No. Match the actual HCT connection and parts drawing.

Does it repair a damaged gate frame?

No. The supporting structure requires separate assessment.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products