LiftMaster Q083 Dolly / Trolley Wheels — HCT, K13-50141

LiftMaster Q083 Dolly / Trolley Wheels — HCT, K13-50141

$21.89
Skip to product information
LiftMaster Q083 Dolly / Trolley Wheels — HCT, K13-50141

LiftMaster Q083 Dolly / Trolley Wheels — HCT, K13-50141

Q083
$21.89
Shipping calculated at checkout.

The LiftMaster Q083 supplier reference maps to K13-50141, the dolly or trolley wheels identified in documented HCT overhead-gate parts information. They run in the specified carriage and rail arrangement and must match the installed shaft and mounting. This is separate from a complete trolley body, wheel shaft, latch and cover. Confirm the required wheel quantity and current supplier package before ordering. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
HCT drawing specifying Q083 Match the exact carriage, shaft and rail arrangement.
Q078 wheel shaft Separate service component.
Complete trolley-body kits Different inventory and repair scope.
Other gate wheels No universal diameter, load rating or mounting compatibility established.

Identify the Assembly and Plan the Repair

Inspect the rail, wheel shaft and carriage when diagnosing rough movement. Worn wheels can accompany a bent rail, damaged shaft or misaligned attachment. A wheel-only replacement should not be used to conceal a structural or alignment problem that will quickly damage the new parts.

Secure the overhead gate and carriage using the manufacturer procedure before removing wheels. Check the actual installed quantity rather than assuming a plural product name defines the carton count. Restore the prescribed retention and free movement and verify the latch, release and complete operator after the repair.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference Q083
Manufacturer reference K13-50141
Component Dolly / trolley wheels
Documented platform HCT carriage arrangement
Quantity Verify current package and installed requirement separately

Before Ordering

  • Confirm Q083 and K13-50141.
  • Identify the correct HCT carriage revision.
  • Inspect rail, shaft and mounting condition.
  • Verify supplied and required quantities separately.

Package Contents and Separate Requirements

The offer identifies the wheel service reference. Shaft, bearings if separately supplied, retaining hardware, complete trolley body, rail and operator are separate unless expressly included. Confirm the current package before disassembly. A drawing showing several installed wheels does not establish that one order contains every wheel for the carriage.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving gate and exposed dolly / trolley wheels — hct, k13-50141 can cause serious injury. Installation and service require a qualified gate-systems technician.
  • Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
  • Support and secure the overhead gate and carriage before removing wheels. Keep hands clear of pinch points and restore all specified wheel retention.
  • Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.

Related Products and Important Differences

  • LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
  • LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.

Frequently Asked Questions

Is the wheel shaft included?

No complete shaft package is promised.

Does wheels establish a carton count?

No. Confirm the current quantity with the supplier.

Can new wheels repair a bent rail?

No. Rail and carriage condition need separate service.

Will these fit any gate wheel position?

No. Match the exact HCT assembly.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products