LiftMaster MA014 Cover Bolt-and-Nut Hardware — Source Four-Piece Offer
The LiftMaster MA014 is the cover-fastening service reference identified in documented Mega Arm equipment. The source supplier describes cover bolt-and-nut hardware with a quantity of four in its offer. Verify the current carton and the exact cover attachment before ordering; this hardware is separate from arm bolts, motor fasteners and the enclosure itself. A shared bolt appearance does not establish the correct thread, length or fastening role. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Mega Arm cover positions specifying MA014 | Match the actual cover and attachment. |
| MA022 arm bolt | Different fastening role and service reference. |
| Motor or reducer bolts | Do not substitute cover hardware for loaded drive attachments. |
| Other enclosure generations | Verify their own fastener requirements. |
Identify the Assembly and Plan the Repair
Identify the missing or damaged cover fasteners by location in the manufacturer drawing. The same operator contains several bolt-and-nut groups serving different loads and attachment methods. Order the cover reference rather than selecting a generic-looking fastener from a photograph.
Inspect the cover, mating threads and supports if hardware has loosened or pulled out. New bolts do not restore stripped threads or a distorted enclosure. Follow the equipment instructions for securing the cover, and do not infer a tightening torque or use an oversized fastener to compensate for damaged attachment points.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | MA014 |
| Service role | Cover fastening hardware |
| Documented family | Mega Arm / Mega Arm Tower arrangements |
| Source quantity description | Four; confirm actual bolt/nut inventory |
| Thread and length | Not established here; match exact service reference |
Before Ordering
- Identify the full operator and cover.
- Confirm MA014 at the correct attachment points.
- Verify the current quantity and supplied nuts.
- Inspect threads, cover alignment and supports.
Package Contents and Separate Requirements
The source offer identifies cover bolt-and-nut hardware with a four-piece quantity description. Confirm the precise current inventory before ordering, including whether the stated count describes bolt/nut sets. A replacement cover, arm hardware, motor mounting parts and operator are separate. No thread dimensions or universal fastener substitution are implied.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed cover bolt-and-nut hardware — source four-piece offer can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is this the arm bolt?
No. MA022 is a separate arm-bolt reference.
Does four establish every carton detail?
Confirm whether the current offer counts sets and which nuts are supplied.
Will new bolts repair stripped threads?
No. The attachment must be assessed separately.
Is a cover included?
No cover is promised with the hardware order.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.