LiftMaster MA0137 No. 7 Shear Pin — Specified Mega Barrier-Arm Assemblies
The LiftMaster MA0137 is the No. 7 shear-pin service reference listed in LiftMaster Mega barrier-arm parts information. It is a different pin from the No. 6 MA013 and must be selected for the actual shaft-and-collar arrangement, not simply because the operator belongs to the Mega family. A shear pin is part of the intended mechanical connection and must not be replaced with an arbitrary stronger fastener. Inspect the arm and mating components after any impact before deciding that a pin-only repair is sufficient.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Assemblies explicitly specifying MA0137 | Verify the installed shaft and collar requirement. |
| Mega barrier models with multiple pin references | Family name alone does not select the pin size. |
| MA013 No. 6 | Different size; not an automatic replacement. |
| Damaged or enlarged mating holes | Require proper component assessment, not a larger improvised pin. |
| Ordinary bolts or stronger fasteners | Not substitutes for the specified shear connection. |
Inspect the Barrier After a Shear-Pin Failure
A broken pin may follow an impact or abnormal load. Before replacing it, inspect the arm, hub, shaft and surrounding hardware for damage or displacement. Replacing only the pin can conceal a bent component or a continuing obstruction that will affect the next operating cycle. Determine what caused the failure before returning the lane to traffic.
The barrier arm must be supported and controlled during service. Do not rely on a failed connection to hold it in position, and do not assume that removing power alone prevents movement. Follow the manufacturer’s procedure for the actual operator and arm arrangement. The new pin should restore the intended connection without enlarging, welding or otherwise improvising a repair to damaged mating holes.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | MA0137 |
| Product | Shear pin |
| Size designation | No. 7 |
| Documented context | Specified Mega barrier-arm service arrangements |
| Different pin | MA013 No. 6 |
| Selection basis | Exact shaft, collar and manufacturer service reference |
Before Ordering
- Identify the exact operator and installed shaft/collar arrangement.
- Confirm that MA0137 No. 7 is specified rather than MA013 No. 6.
- Inspect the arm and mating holes for impact or wear damage.
- Plan safe lane closure, arm support and complete post-repair testing.
Package Contents and Separate Requirements
This offer identifies the MA0137 No. 7 shear pin. Confirm the supplied quantity and current pin specification before ordering. A barrier arm, shaft, collar, gearbox and complete breakaway assembly are not included. Do not transfer the length or geometry of the different MA013 No. 6 pin to this listing. Where an impact damaged adjoining components, obtain the correct replacement parts separately rather than using a new pin to hold a damaged assembly together.
Safety Warnings — Read Before Installation or Service
- WARNING: A falling or unexpectedly moving barrier arm can cause serious injury. A qualified gate technician must secure and support the arm before shear-pin service.
- Disconnect AC and battery power as directed and prevent vehicles or pedestrians from entering the service area.
- Use the specified shear pin. Do not replace it with a stronger bolt, weld the connection solid or modify damaged mating holes as an improvised repair.
- Inspect the complete arm assembly and verify the operator’s prescribed travel and protection tests before reopening the lane.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is MA0137 the same as MA013?
No. MA0137 is No. 7; MA013 is No. 6.
Can I enlarge the hole to make this pin fit?
Do not modify the connection as an improvised repair. Use the specified components.
Can a stronger bolt prevent another failure?
Do not substitute a bolt or defeat the intended shear connection.
Is this a complete barrier-arm repair kit?
No. It is the specified shear pin; inspect and order other damaged parts separately.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.