LiftMaster L506AL 6-Foot Large-Profile Monitored Safety Edge with Aluminum Channel
The LiftMaster L506AL is a six-foot large-profile monitored resistive safety edge supplied with an aluminum mounting channel. It provides contact sensing at an appropriately selected gate or door hazard location when connected through an approved monitored system. The large profile must suit the available mounting space and required protection coverage. It is distinct from the small-profile S506AL and the shorter S504AL; choose by edge profile, length and control compatibility rather than treating all LiftMaster safety edges as interchangeable.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Approved monitored resistive-edge inputs | Confirm the operator’s current approved-device list and wiring requirements. |
| LMWEKITU wireless edge kit | A separate communication option for supported resistive edges and approved operators; verify the complete arrangement. |
| S506AL | Same nominal length but a small profile; mounting geometry and coverage differ. |
| S504AL | A four-foot small-profile assembly; not a dimensionally equivalent replacement. |
| Unmonitored contact or optical-edge inputs | Different sensing arrangements; no direct substitution is established. |
Select the Edge for the Actual Entrapment Location
The protected length and profile must suit the hazard, not simply the amount of channel already installed. A six-foot edge may leave unprotected areas on a longer opening. Have the installer assess the moving surface, surrounding fixed objects and required sensing coverage before deciding on length, orientation and the number of protective devices.
The edge and its communication path must work as a complete monitored system. Decide whether the installation uses an approved wired input or an approved wireless transmitter and receiver. Route and protect the cable as specified, and inspect the channel so it does not prevent the sensing profile from compressing correctly. Environmental ratings do not remove the need for proper mounting, sealing and periodic inspection.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Model | L506AL |
| Nominal length | 6 feet |
| Profile | Large |
| Sensing type | Monitored resistive edge |
| Mounting channel | Aluminum |
| Mounting orientation | Vertical or horizontal |
| Published environmental rating | IP65 |
| Published operating temperature | −40°C to +65°C |
Before Ordering
- Measure the required protected length and available space for the large profile.
- Confirm the operator’s approved monitored-edge arrangement.
- Identify any transmitter, receiver or additional wiring needed.
- Inspect the mounting surface and plan tests along the complete protected length.
Package Contents and Separate Requirements
This offer identifies the six-foot large-profile resistive edge with aluminum channel. Confirm the supplied end and lead arrangement and mounting hardware in the current carton. A wireless transmitter, receiver, operator and additional photo eyes are separate requirements unless explicitly included. Do not assume that purchasing the edge alone creates a complete monitored safety system at the entrance.
Safety Warnings — Read Before Installation or Service
- WARNING: Incorrect edge selection or installation can leave a crushing or entrapment hazard. Use a qualified gate- or door-systems installer.
- Disconnect the applicable power before wiring and secure the moving opening while installing the channel and edge.
- Never bypass monitoring, short the input or add components merely to conceal an edge fault. Do not return damaged sensing material to service.
- Test contact response along the protected length and verify the monitored fault response and operator reversal required by the system instructions.
Related Products and Important Differences
- LMWEKITU monitored wireless edge kit — a separate communication option where the edge and operator are approved for the arrangement.
- S504AL four-foot small-profile edge — a size and profile comparison, not a like-for-like L506AL replacement.
- LMRRUL monitored photo eye — a separate non-contact protection option where approved; it does not sense contact along an edge.
Frequently Asked Questions
Is L506AL the same as S506AL?
No. Both are nominally five feet long, but L506AL has the large profile and S506AL has the small profile.
Can the edge be mounted horizontally?
LiftMaster identifies vertical or horizontal mounting, subject to the complete installation requirements.
Is wireless communication built in?
No wireless transmitter or receiver is promised in this edge-and-channel offer; choose an approved communication arrangement separately.
Does the edge’s safety-standard statement certify the whole gate?
No. Overall safety depends on the complete installation, correct protection coverage, controls and required operating tests.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.