LiftMaster K94-36408-3 Reset Switch with Product ID — LA412
The LiftMaster K94-36408-3 is the reset-switch service assembly with product identification specified for documented LA412 control-box arrangements. The source describes it as a reset switch with an ID resistor for LA412DC, while manufacturer diagrams call it a reset switch with Product ID. Preserve the full -3 suffix when ordering: this assembly is more specific than a generic push button or a similarly shaped reset switch from another operator. It should be selected against the actual control-box revision and diagnosed fault.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Documented LA412DC arrangements | Match the control-box diagram and complete -3 reference. |
| Other LA412 revisions | Verify the current switch reference for the installed control box. |
| LA400 / LA500 reset assemblies | Do not substitute by appearance or connector shape. |
| Generic reset push buttons | Do not reproduce the product-identification function by assumption. |
| Control board or actuator | Separate components; not included in this switch assembly. |
Check the Reset Circuit Without Concealing the Original Fault
A reset switch that appears unresponsive may have a damaged connection, a control-board problem or a fault that has not been corrected. Record diagnostic indications before service and have a technician determine why a reset is needed. Repeatedly resetting a gate is not a repair for obstruction, mechanical binding or a failed safety device. The correct service scope may extend beyond the switch.
Compare the existing assembly and cable route with the LA412 control-box drawing before removal. The product-identification feature is part of the specified assembly, so do not improvise resistor values or bypass the connection to make a generic switch operate. Restore the intended mounting and enclosure closure. After repair, verify normal reset behavior and the gate’s complete movement and safety response.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K94-36408-3 |
| Product | Reset switch with Product ID |
| Source identification detail | ID resistor |
| Source application | LA412DC |
| Documented family | LA412 control-box arrangements |
| Selection basis | Exact switch, control box and connection |
Before Ordering
- Record the LA412 model and control-box revision.
- Match K94-36408-3 including its suffix and identification feature.
- Inspect the switch connection and underlying fault condition.
- Confirm current package contents and the required functional test.
Package Contents and Separate Requirements
This listing identifies the reset switch with Product ID / ID-resistor function. Confirm the current package for its leads, connectors and mounting pieces. A control board, enclosure, actuator, complete wiring harness, solar panel and battery are not promised as included. The switch is not a complete control-box replacement, and changing it does not correct the original condition that caused a fault indication.
Safety Warnings — Read Before Installation or Service
- WARNING: Resetting equipment may permit renewed gate movement. Use a qualified technician and keep the entrance clear during controlled tests.
- Isolate all applicable power, including solar and battery sources, before replacing the assembly or disturbing wiring.
- Do not bypass the Product ID connection, guess resistor values or repeatedly reset an unresolved safety fault.
- Restore the enclosure and test reset operation, travel, stopping and every required protection device before normal use.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is it just a generic push button?
No. The documented assembly includes the Product ID function.
Does the -3 suffix matter?
Yes. Match the full LA412-specific service reference.
Will it fix a fault simply by resetting the controller?
No. Diagnose and correct the underlying condition.
Is a complete control board included?
No control board is promised with this switch offer.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.