LiftMaster K85-FW-75 Flat Washer — 3/4-Inch Designation

LiftMaster K85-FW-75 Flat Washer — 3/4-Inch Designation

$1.77
Skip to product information
LiftMaster K85-FW-75 Flat Washer — 3/4-Inch Designation

LiftMaster K85-FW-75 Flat Washer — 3/4-Inch Designation

K85-FW-75
$1.77
Shipping calculated at checkout.

The LiftMaster K85-FW-75 is the flat-washer service reference listed with a 3/4-inch designation. Select it at the exact equipment callout rather than assume that the short nominal size provides every washer dimension. Confirm the required opening, outside diameter, thickness and material specification from the approved service arrangement before substituting any similar hardware. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Exact washer callout Match K85-FW-75 in the applicable equipment drawing.
Nominal size Confirm the actual fit; do not infer every dimension.
Flat versus lock washer Different hardware functions must remain distinct.
Other attachments No universal washer substitution is established.

Identify the Assembly and Plan the Repair

A washer is part of the documented attachment stack, not simply a loose spacer chosen to fill an available gap. Inspect the bolt or shaft, mating faces and surrounding retention components before selecting the replacement. Damage or wear in adjoining parts may remain even after a missing washer is replaced.

Obtain any unstated dimensions and the approved fitting arrangement before ordering generic substitutes. Do not change washer thickness to compensate for a worn bearing, incorrect shaft position or damaged support. Confirm current supplied quantity separately from an illustrated use quantity, restore the intended attachment stack and complete the functional checks appropriate to the serviced assembly.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Specifications and Product Identification

Specification Details
Ordering reference K85-FW-75
Component Flat washer
Published size designation 3/4 inch
Ordering reference K85-FW-75
Unstated dimensions Verify outside diameter, thickness and complete fit requirements

Before Ordering

  • Record the complete equipment model, serial information and installed service reference.
  • Match K85-FW-75 in the applicable equipment drawing.
  • Confirm the actual fit; do not infer every dimension.
  • Different hardware functions must remain distinct.
  • Confirm the current supplied inventory and the exact installation and final testing instructions.

Package Contents and Separate Requirements

This offer identifies the flat-washer service item. Confirm current quantity and complete dimensional requirements. Nuts, bolts, locking washers, pins, bearings, shafts and complete assemblies are not established as included. The nominal 3/4-inch description does not establish an assortment or a complete fastening kit.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving commercial door and exposed flat washer — 3/4-inch designation can cause serious injury or death. Have a trained door-systems technician perform installation and service.
  • Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
  • Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
  • Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.

Related Products and Important Differences

Frequently Asked Questions

Are all dimensions stated?

No. The nominal size does not establish outside diameter, thickness or every fit requirement.

Is this a lock washer?

No. The manufacturer description identifies a flat washer.

Can it be used as an improvised adjustment shim?

No such adjustment is established. Restore the exact approved hardware arrangement.

How many are supplied?

Confirm current package quantity independently of the number used in the equipment drawing.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products