LiftMaster K76-G0537 DC Alarm Kit — HS670 / SL540 / SL570 / SL580
The LiftMaster K76-G0537 is the DC alarm kit documented for the HS670 and SL540, SL570 and SL580 gate-operator applications. The dedicated instructions distinguish this alarm from an AC version by its body, connector and harness arrangement. Confirm the exact operator and service procedure before ordering; an alarm replacement must restore the warning function while the cause of any active alarm is diagnosed separately. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Listed operator families | Check the exact model and applicable alarm instructions. |
| AC alarm version | Not selected by appearance alone; the instructions distinguish the versions. |
| Other alarm references | Confirm exact harness and service compatibility. |
| Entrapment protection | Alarm is not a substitute for approved sensing devices. |
Identify the Assembly and Plan the Repair
The replacement procedure identifies specific differences between AC and DC alarms, including the connection and harness. Have the technician compare the existing arrangement with the instructions instead of assuming the sounder body is the only relevant part. A wiring or operator fault can remain even when a new sounder produces a warning.
If an alarm is active, determine whether it correctly reports a problem before replacing it. A gate obstruction, drive fault or protection-device problem needs its own repair. Keep the documented warning circuit intact and complete the prescribed gate-system checks after the alarm service; do not disconnect the sounder simply to silence a recurring symptom.
Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K76-G0537 |
| Alarm type | DC service kit |
| Documented families | HS670; SL540 / SL570 / SL580 |
| Identification | Removable connector and specified harness arrangement |
| Service instruction | Dedicated K76-G0537 installation sheet |
Before Ordering
- Record the exact operator and alarm reference.
- Identify the existing AC or DC alarm arrangement.
- Check the dedicated kit instructions and harness requirements.
- Diagnose active alarm conditions before selecting the repair.
Package Contents and Separate Requirements
The dedicated instruction sheet lists one alarm with harness, one additional blue wire, four wire ties and one flange. Confirm the current supplied inventory and model-specific use of those pieces. A control board, complete operator and monitored safety devices are separate products, not established as included with the alarm kit.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed dc alarm kit — hs670 / sl540 / sl570 / sl580 can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Do not disconnect or silence the alarm to conceal a fault. Diagnose the initiating condition and preserve all required monitored protection and warning functions.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is this the AC alarm?
The instruction sheet identifies K76-G0537 as the DC alarm kit and explains how the alarm versions differ.
Does a new alarm fix an entrapment fault?
No. The warning component and the condition initiating the warning must be diagnosed separately.
Is a harness identified in the kit?
Yes. The dedicated instructions list an alarm with harness and associated service pieces; confirm the current package.
Can I leave the alarm disconnected?
Do not defeat the warning function. Restore the approved alarm circuit and complete the required functional checks.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.