LiftMaster K74-G0589 Hall-Effect / RPM Sensor Kit — Selected Slide Operators
The LiftMaster K74-G0589 is the Hall-effect RPM-sensor kit identified in documented legacy slide-gate repair information. The source names SL590, SL595 and HS670GL applications, while the exact model and installed feedback assembly remain essential to selection. It is a movement-sensing service component rather than an external safety photo eye, complete limit box or control board. Preserve the complete G0589 reference when ordering and have a technician check the sensor path and mechanical drive before treating every motion fault as a failed sensor.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Legacy SL595 arrangements | Manufacturer repair information identifies this sensor kit. |
| SL590 / HS670GL | Source-listed applications; verify the exact model drawing. |
| Later U / UL operators | Do not assume the same sensor from a similar family name. |
| Limit switches and complete limit boxes | Different service components. |
| Photo eyes or vehicle-loop detectors | Different sensing functions; not replacements for this kit. |
Separate a Sensor Fault from a Drive or Wiring Fault
Movement-feedback faults can involve the sensing component, its connection or the rotating mechanism being monitored. Record symptoms and diagnostic indications before removing parts. Have the technician inspect wiring condition, mounting security and the drive’s freedom of movement. A replacement sensor cannot repair a broken drive connection, damaged gearbox or gate that binds along its path.
Compare the installed sensor with the exact legacy operator drawing and preserve the prescribed relationship to its monitored mechanism. Do not reposition a sensor or alter related parts merely to suppress a fault. Check the current kit inventory before disassembly, then follow the manufacturer’s service and setup requirements. Verify the gate’s stopping positions and all required protection functions under controlled conditions after the repair.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K74-G0589 |
| Component | Hall-effect / RPM sensor kit |
| Source applications | SL590 / SL595 / HS670GL |
| Verified diagram example | Legacy SL595 |
| Function | Movement feedback |
| Selection basis | Exact operator revision and sensor arrangement |
Before Ordering
- Record the full operator model and sensor reference.
- Confirm the applicable G0589 kit and installed arrangement.
- Inspect wiring, mounting and the mechanism being monitored.
- Plan the required post-service travel and safety tests.
Package Contents and Separate Requirements
This offer identifies the Hall-effect RPM-sensor kit. A complete limit box, control board, motor, gearbox and full operator harness are not promised as included. Confirm the current carton for any sensor-specific bracket, connection and mounting pieces. The kit title should not be treated as an entire rebuilt feedback system; determine the separate parts needed for damaged wiring or mechanical components before scheduling service.
Safety Warnings — Read Before Installation or Service
- WARNING: Incorrect position feedback can result in unexpected or incorrect gate movement. Replacement requires a qualified gate-systems technician.
- Disconnect and secure utility and battery power, and prevent gate movement before accessing the assembly.
- Never bypass feedback or safety inputs to keep a faulted operator running. Correct the fault before normal service.
- Follow the model-specific setup procedure and verify travel, reversal and every required protection device after the repair.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is this an external safety sensor?
No. It is the operator’s Hall-effect RPM-feedback service kit.
Can it replace a limit switch?
No. The limit switch and RPM sensor are separately identified components.
Does every SL595 generation use it?
Check the exact model and generation rather than the shortened family name.
Will it fix mechanical binding?
No. The gate and drive require separate diagnosis and repair.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.