LiftMaster K74-18379 Hall-Effect Sensor Kit — Legacy GL Gate Operators
The LiftMaster K74-18379 is the Hall-effect sensor kit identified in documented legacy GL-board slide-gate operator service information. The source lists SL540, SL570, SL580, SL575 and SL585 GL applications, while the SL575 manufacturer manual explicitly identifies this kit within the control-box parts information. Match the actual control generation and installed sensing arrangement before ordering. It is a drive-feedback service component, separate from the limit switches, external photo eyes and main board, and a reported motion fault should be diagnosed across the sensor, wiring and mechanical drive.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Documented SL575 GL arrangement | Manufacturer parts information identifies K74-18379. |
| Source-listed SL540 / SL570 / SL580 / SL585 GL | Confirm the actual board and current service reference. |
| Later U / UL control generations | Do not assume compatibility with newer encoder or feedback systems. |
| Commercial-door RPM sensors | Different application and service reference. |
| External entrapment sensors | Separate functions; this feedback kit is not a replacement photo eye or edge. |
Diagnose Feedback and Mechanical Movement Together
A drive-feedback fault can arise from the sensor, its connection, associated wiring or a mechanism that is not moving correctly. Have the technician inspect these together before choosing the kit. A stalled motor or binding gate can prevent the expected feedback even when the sensing component itself remains serviceable. Record diagnostic behavior rather than assuming every motion-related fault requires a new sensor.
Photograph the installed control board, sensor and connection arrangement before service. A legacy enclosure may contain replacement electronics from an earlier repair, so the outside model label is not always enough to identify the correct feedback hardware. Use the applicable service drawing and current replacement guidance. Restore the specified sensor positioning and connections and verify operation through the complete gate cycle after installation.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K74-18379 |
| Product | Hall-effect sensor assembly kit |
| Documented control generation | Legacy GL gate controls |
| Primary manual example | SL575 control-box parts information |
| Additional source families | SL540 / SL570 / SL580 / SL585 with GL board |
| Selection basis | Exact operator, control board and feedback arrangement |
Before Ordering
- Identify the full gate model and actual GL control board.
- Match K74-18379 to the installed sensing arrangement.
- Inspect connections, drive movement and associated feedback components.
- Confirm the current kit contents and required post-service tests.
Package Contents and Separate Requirements
This listing identifies the Hall-effect sensor kit. Confirm the current carton for the sensing assembly, leads, bracket and any mounting pieces required by the documented configuration. A main control board, motor, limit shaft, complete electrical enclosure and external protection devices are not promised as included. Nearby components in the operator drawing remain separate unless the supplier explicitly identifies them within the current kit inventory.
Safety Warnings — Read Before Installation or Service
- WARNING: Gate drives contain hazardous electrical energy and exposed moving parts. Feedback-sensor service requires a qualified gate technician.
- Isolate all applicable power and secure the gate before accessing the sensor or control enclosure.
- Never bypass feedback, limits or protection inputs to force a faulty operator to run. Correct the underlying problem.
- Restore guards and verify travel, reversal and every required protection device before returning the entrance to normal use.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is this an external safety photo eye?
No. It is an internal drive-feedback service component.
Will it fit every SL585 generation?
No. Confirm the actual GL control and sensor arrangement.
Is it the same as a residential RPM sensor?
No interchangeable fit is established; match the exact part and equipment.
Will it repair a stalled or binding drive?
Not by itself. The motor, wiring and gate mechanics require diagnosis.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.