LiftMaster K71-10345 RPM Sensor Board — Documented MT Mechanical Operators
The LiftMaster K71-10345 is the RPM-sensor-board service reference identified for documented MT mechanical commercial-door operator controls. It must be matched to the installed operator and sensor arrangement rather than confused with a complete main board, newer encoder or the K79-15016-1 sensor assembly. An RPM-related fault can involve wiring, the target mechanism oractual motor movement, so diagnosis should establish whether the board has failed. This is a model-specific feedback component, not a universal safety sensor or an operator-speed upgrade.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| MT repair information specifyingK71-10345 | Match installed generation and feedback arrangement. |
| Othermedium-duty operators | Require their exact service list. |
| K79-15016-1 | Different sensor service assembly. |
| Newer encoders ormain boards | No upgrade orinterchangeability established. |
| Required photo eyes oredges | Separate protection functions. |
Check the Feedback Path and Actual Motor Movement
Record the operator and installed sensor-board labels and preserve relevant fault information. Have the technician inspect wiring, connections and the mechanical target arrangement under the exact manual. An RPM fault can occur when the motor or drive is not moving correctly, even if the sensor board itself remains functional. Do not choose the board only because a diagnostic code mentions feedback.
Match the replacement and mounting to the exact installed controls. Do not move a sensor, alter its target or substitute a similar board by guesswork. Correct mechanical resistance and wiring damage before completing the repair. After installation, verify the intended feedback response and normal door cycle, then test travel, reversal and every required protection device before returning the operator to normal service.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K71-10345 |
| Product | RPM sensor board |
| Manufacturer designation | MT |
| Selection basis | Exact mechanical-control and sensor arrangement |
| Separate reference | K79-15016-1 |
| Ratings and target details | Match exact current component and operator instructions |
Before Ordering
- Record full MT model and sensor-board reference.
- Confirm K71-10345 in the exact repair information.
- Inspect wiring, target and actual drive movement.
- Plan feedback verification and full door-safety checks.
Package Contents and Separate Requirements
This offer identifies the K71-10345 RPM sensor board. A complete target/interrupter assembly, main control board, motor, harness and operator are not promised as included. Confirm the current board, mounting and connection pieces with the package. A parts drawing may show the feedback components together while numbering them separately. Identify additional damaged wiring or mechanical parts before selecting a board-only repair.
Safety Warnings — Read Before Installation or Service
- WARNING: Commercial door equipment contains hazardous voltage and moving drive parts. Sensor replacement requires a trained door-systems technician.
- Disconnect and secure all applicable power sources before accessing the electrical enclosure or drive assembly.
- Do not bypass feedback, limits or protection devices to force an operator to run after a fault. Correct the underlying problem.
- Restore guards and verify the prescribed travel, reversal and monitored-safety responses before returning the door to normal use.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Is this a complete main board?
No. It is the RPM feedback board.
Is it the same asK79-15016-1?
No equivalence is established;use the exact reference.
Does an RPM fault prove board failure?
No. Wiring, target and motor movement need diagnosis.
Can it replace photo eyes?
No. They have separate safety functions.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.