LiftMaster K41-0433-000 TECHNA PCB Pivot Assembly
The LiftMaster K41-0433-000 identifies the PCB pivot assembly listed in the TECHNA barrier-operator service information. This is the mechanical pivot assembly associated with the control-board arrangement, not a replacement logic board. Match the full TECHNA model and cabinet revision so that the pivot, supporting tray and electronics are identified as separate service components. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Matching TECHNA cabinet | Confirm the exact pivot-assembly service callout. |
| Main control electronics | A mechanical pivot does not replace the logic board. |
| PCB tray | Separate service identity; confirm the actual damaged component. |
| Other barrier cabinets | No general pivot interchangeability is established. |
Identify the Assembly and Plan the Repair
Identify whether the problem concerns the pivot, its supporting structure or the electronics it carries. Inspect the attachment points and the cause of stiffness or damage before ordering. A new pivot cannot repair a bent tray, broken cabinet support or a damaged board. Keep the mechanical and electrical callouts distinct when reviewing the required repair package.
Have qualified personnel isolate the equipment and protect the board and wiring while working around the pivot assembly. Preserve the intended movement and wire clearance without stretching conductors or trapping them between moving supports. Confirm the current kit’s attachment pieces and the exact fitting procedure, then restore the cabinet and verify the operator’s required functions after service.
An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K41-0433-000 |
| Component | PCB pivot assembly |
| Documented family | TECHNA barrier operator |
| Separate electronics reference | K41-0431-000 in the researched service list |
| Separate tray reference | K41-0432-000 in the researched service list |
Before Ordering
- Record the full TECHNA model and cabinet revision.
- Match K41-0433-000 to the mechanical pivot callout.
- Inspect the separate tray, board and cabinet supports.
- Confirm current hardware and safe wiring clearances.
Package Contents and Separate Requirements
This offer identifies the PCB pivot assembly. A main logic board, complete PCB tray, wiring harness, cabinet and barrier operator are not established as included. Confirm current pivot hardware and any separately damaged support components from the exact service drawing before ordering.
Safety Warnings — Read Before Installation or Service
- WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
- Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
- Do not bypass grounding, overload protection, monitored safety devices or fire-control functions to make the equipment operate. Diagnose the underlying fault.
- Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Does PCB in the name mean a logic board is included?
No. The reference identifies the pivot assembly associated with the board arrangement.
Is it the same as the PCB tray?
No. The researched service list distinguishes the tray and pivot references.
Can it repair damaged electronics?
No. Electrical faults require their own diagnosis and approved service components.
Will every TECHNA cabinet use the same arrangement?
Do not assume so. Match the complete model, revision and current pivot recommendation.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.