LiftMaster K41-0254-000 Motor — IHSL24UL Industrial Slide Operator
The LiftMaster K41-0254-000 is the replacement motor identified for the IHSL24UL industrial slide-gate operator. Manufacturer repair information distinguishes it from the INSL24UL motor and from the separate IHSL24UL BLDC motor-drive board. Select the motor using the full operator model, installed connections and service drawing, not a shared DC designation or similar housing. A gate that does not run can have a power, control, drive-electronics or mechanical fault, so replacement should follow diagnosis of the complete system.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| IHSL24UL | Manufacturer repair diagram identifies this motor. |
| INSL24UL | Different motor reference; do not transfer fit from a shared manual. |
| K41-0245-000 motor-drive board | Separate electronics, not included by the motor designation. |
| HDSL24UL / HDSW24UL motors | Different platform and service reference. |
| Other DC gate motors | Nominal supply or appearance does not establish fit. |
Separate a Motor Fault from a Drive-Electronics Fault
A motor that does not turn may be responding to a supply, wiring, motor-drive or control fault. Have the technician evaluate those systems and the gate’s mechanical condition before ordering. Check that the gate rolls correctly and that the transmission is serviceable. Replacing the motor without correcting a damaged gearbox or binding gate can leave the cause of the failure unresolved.
Record the installed motor label, connections and mounting before disassembly. Use the IHSL24UL motor entry in the shared industrial-operator manual and keep the motor-drive board and reducer as separate purchasing decisions. Restore the prescribed wiring route and drive connection without modifying a mismatched replacement. Follow the manufacturer’s post-service setup and controlled operating tests before reopening the entrance.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K41-0254-000 |
| Product | Replacement motor |
| Documented operator | IHSL24UL |
| Separate motor-drive board | K41-0245-000 |
| Separate gear reducer | K41-0252-000 |
| Selection basis | Exact operator and installed motor arrangement |
Before Ordering
- Record the IHSL24UL model and existing motor reference.
- Diagnose supply, drive electronics and mechanical load.
- Compare mounting, connections and current service instructions.
- Identify any separately required drive or retention components.
Package Contents and Separate Requirements
This offer identifies the K41-0254-000 motor. The motor-drive board, gear reducer, transformer, main control board, batteries and complete operator are separate components. Confirm the current motor carton for leads and attachment pieces. A shared repair drawing showing several power and transmission parts does not make them part of the motor package; determine the complete repair inventory before work begins.
Safety Warnings — Read Before Installation or Service
- WARNING: Motor service can expose hazardous electrical energy and permit unexpected gate movement. Use a qualified gate-systems technician.
- Disconnect AC, solar and battery sources as applicable and secure the gate before working on the drive.
- Restore the specified connections and wire routing; do not improvise motor or drive substitutions.
- Restore guards and complete the prescribed travel, reversal and safety-device tests before normal use.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate monitored-edge communication system with its own compatibility requirements; it does not replace this service part.
Frequently Asked Questions
Does it include the motor-drive board?
No. K41-0245-000 is separately identified.
Will it fit INSL24UL?
No shared fit is established; use that model’s own motor reference.
Can another DC motor replace it?
Only with approval for the exact motor, drive and mounting combination.
Will a motor replacement fix a gate that binds?
No. The gate and transmission require separate assessment and repair.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.