LiftMaster K41-0240-000 Idler Sprocket Kit — IHSL24UL, Quantity Two
The LiftMaster K41-0240-000 is the two-idler-sprocket service reference identified for the IHSL24UL industrial slide-gate operator. It must be distinguished from the separate INSL24UL idler reference and from the output sprocket or idler-support bracket. Match the installed industrial operator and chain path before ordering. Idlers guide the chain through the documented arrangement; replacing them does not change the approved chain size, restore a bent support or correct a gate that rolls poorly on its own track.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| IHSL24UL listing K41-0240-000 | Match the complete model and installed chain arrangement. |
| INSL24UL | Use its separate idler service reference. |
| K41-0118-000 HD idlers | Different platform and service item. |
| Output drive sprocket | Separate component and purchase scope. |
| Damaged idler bracket or shaft | Requires independent assessment. |
Inspect the Chain Path and Idler Mounting Together
Wear at an idler may be a symptom of misalignment, damaged mounting hardware or incorrect chain adjustment. Have the technician inspect the complete chain path and the gate’s rolling movement before ordering. Replacing only the idlers while leaving a distorted support or damaged chain in place can allow the original noise and tracking problem to continue.
Photograph the installed routing and compare it with the IHSL24UL manual. During replacement, preserve the specified spacers, alignment and retention arrangement, using the current service instructions for the kit. Do not infer chain tension from appearance or tighten the drive simply to silence a noise. After service, restore guards and confirm that the gate travels correctly without interference through its operating range.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K41-0240-000 |
| Product | Idler sprocket service kit |
| Listed quantity | Two |
| Documented operator | IHSL24UL |
| Separate component | Output sprocket and idler bracket |
| Selection basis | Exact model and chain-path diagram |
Before Ordering
- Record the IHSL24UL model and installed idler reference.
- Confirm the two-sprocket kit and correct chain path.
- Inspect chain, supports and retention hardware.
- Check gate rolling resistance before final chain adjustment.
Package Contents and Separate Requirements
The manufacturer parts description identifies two idler sprockets under K41-0240-000. Confirm any supplied bearings, bolts and retention pieces against the current package. Chain, output sprocket, complete idler bracket, motor, reducer and industrial operator are separate requirements. The drawing may show those related components together without bundling them into this kit. Inspect the full drive and identify additional damage before ordering a sprocket-only repair.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed chain and idler pinch points can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
How many idlers are listed?
The service description specifies two.
Is it the INSL24UL kit?
The documented reference here is IHSL24UL; use the exact model list.
Is the output sprocket included?
No output sprocket is promised with this idler kit.
Will new idlers correct a bent bracket?
No. The supporting components need separate repair.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.