LiftMaster K41-0117-000 Touchscreen Display and Door Kit — CAPXL / CAPXLV
LiftMaster K41-0117-000 Touchscreen Display and Door Kit — CAPXL / CAPXLV
The LiftMaster K41-0117-000 is the touchscreen-display-and-door service kit documented for CAPXL and CAPXLV access-control systems. The manufacturer describes a fully assembled replacement door with its LCD touchscreen and related sealing components, rather than a display-only repair. The installation instructions also specify a new K001D8439 Power/Internet board shipped in a separate box. Confirm the current kit revision and complete shipment before scheduling service, because the display, power-board connections and transferred components must form the documented replacement arrangement.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| CAPXL / CAPXLV | Manufacturer instructions cover the documented touchscreen and door replacement. |
| K001D8439 Power/Internet board | Specified by the kit instructions as a separate shipment; confirm fulfillment and required installation. |
| K41-0103-000 display-only / K41-0104-000 faceplate-only repairs | Different service scopes; do not assume identical contents or procedure. |
| CAPXM / CAPXS / CAPXLV2 | No universal CAP-family fit established. |
| Existing camera, audio and reader components | The procedure transfers specified existing parts; verify their condition independently. |
Plan the Complete Display Conversion and Preserve the Seals
Inspect the display, door, mounting points and interior for impact or moisture damage before choosing the repair. A new door assembly will not correct damaged components elsewhere in the intercom. Review the complete instructions before disassembly so the installer can identify every retained part and the connections that change with the replacement arrangement.
The manufacturer procedure transfers components such as the camera, speaker, microphone, reader bracket, control board and light sensor as applicable. It also emphasizes the microphone boot seal: an incorrect seal can allow water ingress and affect touchscreen operation. Preserve the specified gaskets, cable routing and sealing details rather than treating this as a purely cosmetic faceplate swap.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K41-0117-000 |
| Manufacturer kit name | Touchscreen display and door kit |
| Documented systems | CAPXL and CAPXLV |
| Main assembly | Replacement door with LCD touchscreen |
| Separately boxed component in instructions | K001D8439 Power/Internet board |
| Selection requirement | Exact intercom revision and complete service-kit inventory |
Before Ordering
- Record the complete CAPXL or CAPXLV model and manufacturing revision.
- Confirm the touchscreen-and-door kit rather than a display-only or faceplate-only item.
- Verify receipt of the separately boxed Power/Internet board specified by the instructions.
- Inspect transferred components, seals and wiring before scheduling recommissioning.
Package Contents and Separate Requirements
The documented carton includes the assembled door and LCD touchscreen, display gasket, camera window, nine 6-32 nuts, eight cable ties and instructions. The manufacturer states that the new K001D8439 Power/Internet board ships separately. Confirm that the current supplier shipment provides the full required configuration. A new camera, speaker, microphone, access reader, complete intercom and subscription are not promised as included; specified existing components are transferred during the repair.
Safety Warnings — Read Before Installation or Service
- WARNING: Intercom service must preserve required emergency egress and safe door or gate operation. Use a qualified access-control installer.
- Disconnect the applicable power sources before opening the unit or moving boards and cables. Account for separately powered locks and connected equipment.
- Support the door assembly during removal and installation. Restore all required seals, especially the microphone boot, and avoid trapping or damaging cables.
- Test the touchscreen, audio/video functions where fitted, authorized access, release and required egress behavior before returning the entrance to service.
Related Products and Important Differences
- KPW250 wireless keypad — a separate access method for its supported receiver arrangement; not a replacement display or a promised CAPXL-connected reader.
- LMRRUL monitored photo eye — a separate gate-protection option where the actual operator approves it; intercom service must preserve gate safety.
Frequently Asked Questions
Is this only the LCD display?
No. The manufacturer identifies a touchscreen display and door kit with a broader replacement procedure.
Is the Power/Internet board relevant to this kit?
Yes. The instructions specify a new K001D8439 board shipped in a separate box. Confirm the complete current shipment.
Does the kit include a new camera and speaker?
Those are not promised as new components; the procedure transfers specified existing equipment.
Will it fit every CAP-branded intercom?
No. Match the exact CAPXL or CAPXLV revision and service instructions; newer and smaller CAP models are separate platforms.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection
