LiftMaster K41-0085-000 Cludge Assembly — HDSW24UL
The LiftMaster K41-0085-000 is the cludge assembly identified for the HDSW24UL heavy-duty swing-gate operator. It is a mechanical service assembly within the output-arm arrangement, separate from the complete output shaft and the protective cludge cover. Use the full part number when selecting the repair: the word cludge appears in several LiftMaster part descriptions, but it does not make assemblies from different gate platforms interchangeable. Inspect the installed mechanism, arm connections and gate movement before deciding that this assembly alone completes the repair.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| HDSW24UL | Manufacturer parts drawing identifies this assembly. |
| K13-36117-1 cludge cover | Protective cover only; not the mechanism. |
| K41-0086-000 output shaft | Separate service assembly. |
| Legacy CSW or RSW cludge assemblies | No interchangeable fit established. |
| Standard arm assembly | Separate linkage and package scope. |
Identify the Failed Mechanical Connection
Loss of motion or unwanted play in a swing-arm arrangement can involve the cludge, output shaft, arm connection or gearbox. Have a qualified gate technician inspect the complete mechanism before ordering. Compare the observed wear with the HDSW24UL drawing and inspect the gate hinges and support geometry. A new assembly cannot correct a bent arm or a gate that requires excessive force to move.
Document the installed positions and retention hardware before dismantling the mechanism. Follow the manufacturer’s procedure for securing the gate and restoring the mechanical connection; do not substitute a similar-looking legacy assembly or use extra tightening to conceal worn mating parts. Once service is complete, restore the protective cover and check both the normal powered movement and any prescribed manual-release function.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K41-0085-000 |
| Manufacturer component name | Cludge assembly |
| Documented operator | HDSW24UL |
| Separate output shaft | K41-0086-000 |
| Separate cover | K13-36117-1 |
| Selection basis | Exact mechanism and connected arm arrangement |
Before Ordering
- Record the HDSW24UL model and identify the cludge assembly.
- Distinguish the mechanism from its cover and output shaft.
- Inspect mating parts, arm geometry and gate movement.
- Confirm current package contents and required adjustment procedures.
Package Contents and Separate Requirements
This offer identifies the K41-0085-000 cludge assembly. Confirm the current assembly inventory and supplied retention pieces before work begins. The separately listed cludge cover, complete output shaft, output arm, standard arm assembly, gearbox and operator are not promised as included. A diagram showing the complete swing mechanism explains how the parts relate; it is not an inventory of this service order.
Safety Warnings — Read Before Installation or Service
- WARNING: A moving gate and exposed cludge mechanism and swing-arm connections can cause serious injury. Installation and service require a qualified gate-systems technician.
- Isolate AC power, batteries and any solar supply as applicable, and secure the gate against unexpected movement before work begins.
- Keep people clear of the gate and drive during supervised testing. Never bypass required entrapment-protection devices or increase force to overcome a mechanical fault.
- Restore all covers and guards, then verify travel endpoints, reversal and every required safety device before returning the gate to normal operation.
- Support and secure the gate before disengaging any mechanical connection. Never loosen the assembly while relying on the operator alone to hold the gate stationary.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate protection option only where the exact operator and control revision approve it; not a universal legacy retrofit.
- LMWEKITU monitored wireless edge kit — a separate edge communication system for approved controls and resistive edges; not a replacement for this mechanical or electrical service part.
Frequently Asked Questions
Is this just the cover?
No. K13-36117-1 is the separate protective-cover reference.
Is the output shaft included?
The complete output shaft has its own K41-0086-000 reference.
Can a CSW cludge assembly replace it?
No universal fit is established; use the HDSW24UL-specific reference.
Will it solve damaged hinge geometry?
No. The gate and support arrangement require separate correction.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.