LiftMaster K41-0062-000 Gear Reducer — 39:1, HDSL24UL / HDFSL24UL
The LiftMaster K41-0062-000 is the 39:1 gear reducer specified for documented HDSL24UL and HDFSL24UL heavy-duty slide-gate arrangements. It is a mechanical transmission service item, separate from the motor, external drive components and complete operator. Match the full part number, mounting and shaft connections to the installed model before ordering. A matching reduction ratio alone does not establish a substitute, and replacing the reducer does not repair a gate that binds on its track or has damaged wheels, supports or drive connections.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| HDSL24UL | Manufacturer parts information specifies this reducer. |
| HDFSL24UL | Match the exact service drawing and installed configuration. |
| HDSW24UL swing operator | Different platform; no interchangeable fit established. |
| Legacy 30:1 reducers | Different ratio and assembly references. |
| Other 39:1 gearboxes | Ratio alone does not establish mechanical compatibility. |
Confirm Which Gearbox and Associated Parts Need Repair
A gate drive can contain more than one gear-reduction assembly. Identify the failed stage before ordering a gear reducer. Noise, excess movement or failure to transmit motion may also involve a shaft connection, chain, belt or arm hardware. A technician should inspect the complete drive rather than assuming all motion problems originate inside this assembly.
Document the operator model and the existing gearbox arrangement before disassembly. Older equipment may have undergone prior repairs, so compare the installed part with the correct service drawing. Check the output-shaft and mounting condition at the same time. A new gearbox should not be fitted to worn connections or used to force a gate that does not move correctly on its own supports.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K41-0062-000 |
| Component | Gear reducer |
| Reduction ratio | 39:1 |
| Application | HDSL24UL / HDFSL24UL; match revision |
| Motor | Separate component |
| Selection basis | Exact service reference, mounting and shaft arrangement |
Before Ordering
- Record the full HDSL24UL or HDFSL24UL model and existing reducer identification.
- Match K41-0062-000 in the applicable service drawing.
- Inspect shaft connections, drive alignment and gate rolling condition.
- Confirm current carton contents and lubrication/service instructions.
Package Contents and Separate Requirements
This listing identifies the K41-0062-000 gear reducer. A motor, external pulley, belt, drive chain, limit assembly, manual-crank mechanism and complete operator are not promised as included. Confirm the current service package for connection and mounting pieces and follow its lubrication instructions. The surrounding exploded view shows related parts without establishing that they accompany the reducer order.
Safety Warnings — Read Before Installation or Service
- WARNING: Gearbox removal can disconnect the gate from its drive and allow unexpected movement. Use a qualified gate-systems technician.
- Isolate all applicable power and secure the gate before removing drive components.
- Do not compensate for binding or damaged hardware by increasing operator force. Correct the mechanical cause before returning the drive to service.
- Follow the specified assembly and maintenance instructions, restore guards and verify travel, reversal and all required protection devices.
Related Products and Important Differences
- LMRRUL monitored photo eye — a separate safety accessory only where approved by the operator’s exact control revision.
- LMWEKITU monitored wireless edge kit — a separate monitored-edge system; it neither replaces the gearbox nor establishes compatibility with older controls.
Frequently Asked Questions
What is the reduction ratio?
The specified reduction ratio is 39:1.
Is the motor included?
A combined motor package is not promised with this reducer offer.
Does it fit every heavy-duty LiftMaster operator?
No. Match the full model and exact reducer reference.
Will it fix a gate that rolls poorly?
No. Track, wheels and structural faults require separate correction.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.