LiftMaster K2A1832 LA350 Swing-Gate Control Board
The LiftMaster K2A1832 is the control-board service reference identified in the manufacturer LA350 swing-gate operator manual. It must match the installed LA350 controls and regional equipment configuration. It is separate from the FA70LM control-box enclosure, linear actuator and optional accessories. A shared LA-series name does not establish board compatibility with LA400, LA412 or LA500 equipment, and replacement does not convert the operator into a later control generation. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| LA350 | Manufacturer service list identifies K2A1832. |
| Other LA-series operators | Different boards and controls; no universal interchangeability. |
| FA70LM control box | Separate service scope. |
| Accessory upgrades | Verify against the exact LA350 manual and installed revision. |
Identify the Assembly and Plan the Repair
Record the existing board, operator labels and wiring before ordering. Diagnose supply, actuator feedback, controls and protection devices rather than replacing electronics solely because the gate will not move. Preserve useful fault information and inspect any damage to connectors or the enclosure.
Follow the exact LA350 procedure for board installation, setup and testing. Do not transfer wiring or accessory assumptions from a newer LA operator. A replacement board does not establish new monitored-safety capabilities, connected services or a complete compliance conversion. Have the technician evaluate the complete installed system before returning it to normal use.
An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.
Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K2A1832 |
| Component | Control board |
| Documented operator | LA350 |
| Separate enclosure | FA70LM |
| Selection | Exact board, model and regional configuration |
Before Ordering
- Confirm LA350 and K2A1832.
- Record the regional model and installed connections.
- Diagnose power, actuator and protection faults.
- Plan exact setup and full supervised safety tests.
Package Contents and Separate Requirements
The offer identifies the control board. Control box, actuator, transformer, batteries, remotes and safety devices are separate unless expressly included. Confirm current supplied connection and mounting pieces. A manual showing the complete operator and its accessories does not make those components part of a board-only order.
Safety Warnings — Read Before Installation or Service
- WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
- Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
- Do not transfer wiring or protection assumptions from a newer LA control board. Preserve required safety devices and complete the exact LA350 setup and tests.
- Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Does it fit LA400?
No automatic compatibility is established; it is documented for LA350.
Is the control box included?
FA70LM is separately identified.
Does it add newer connected services?
No such upgrade is established.
Are setup tests required?
Follow the exact LA350 replacement and commissioning procedure.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.