LiftMaster K20-3075C-4P Commercial Motor — Three-Quarter HP, 230/ 460V Three-Phase C-Face
The LiftMaster K20-3075C-4P is the commercial motor service reference identified with 3/4HP,230/ 460V, three-phase and C-face mounting in manufacturer parts literature. Match the complete number and installed operator circuit before ordering. The similarly numbered-H25, foot-mount and other enclosure variants are separate service selections. This motor is not a complete drive kit or a means of changing an operator’s approved electrical supply or door capacity. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Drawings specifying K20-3075C-4P | Verify the actual operator generation and motor. |
| Single-phase equipment | Not a direct phase conversion. |
| Foot-mount variants | Different mounting and potentially different drive interface. |
| -H25 or other suffixes | Confirm exact service selection; do not omit the suffix. |
Identify the Assembly and Plan the Repair
Record the existing motor label, mounting and drive connection and compare them with the correct repair drawing. A matching horsepower number alone does not establish speed, shaft, rotation, enclosure or wiring compatibility. No unverified RPM, frame size or capacitor requirement is assigned here.
Diagnose the supply, controls and mechanical load before fitting a replacement motor. A brake fault, damaged reducer or binding door can overload a working motor. Follow the current connection diagram and approved mounting procedure, then verify rotation and complete operator function under controlled testing by qualified personnel.
An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.
Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Ordering reference | K20-3075C-4P |
| Power | 3/4HP |
| Supply designation | 230/ 460V, three phase |
| Mounting | C-face |
| Selection basis | Full service number and exact motor/operator nameplate |
Before Ordering
- Confirm the full unsuffixed motor reference.
- Verify3/4HP,230/ 460V and three-phase circuit.
- Match C-face mounting and shaft engagement.
- Inspect controls, drive alignment and door load.
Package Contents and Separate Requirements
The offer identifies the motor. Reducer, pulley, brake, complete starter, harness, mounting structure and operator are separate unless explicitly bundled. Confirm current connection and mounting pieces in the carton. A diagram grouping these drive components does not make them a combined motor order.
Safety Warnings — Read Before Installation or Service
- WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
- Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
- Three-phase motor service requires qualified electrical personnel. Do not guess lead connections, change phase or alter protective settings to overcome mechanical resistance.
- Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Can it replace a single-phase motor directly?
No. Phase and the complete approved circuit must match.
Is a reducer included?
No reducer is promised.
May I ignore-H25 on another motor?
No. Match the complete service reference.
Does it increase door capacity?
No capacity upgrade is established by replacing this motor.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.