LiftMaster K20-1075C-2LP Commercial Motor — Three-Quarter HP, 115/ 230V Single-Phase C-Face

LiftMaster K20-1075C-2LP Commercial Motor — Three-Quarter HP, 115/ 230V Single-Phase C-Face

$907.37
Skip to product information
LiftMaster K20-1075C-2LP Commercial Motor — Three-Quarter HP, 115/ 230V Single-Phase C-Face

LiftMaster K20-1075C-2LP Commercial Motor — Three-Quarter HP, 115/ 230V Single-Phase C-Face

K20-1075C-2LP
$907.37
Shipping calculated at checkout.

The LiftMaster K20-1075C-2LP is the motor service reference identified for the specified commercial drive arrangement, with a 3/4HP, 115/ 230V, single-phase C-face description in the supplied offer and manufacturer parts information. Match the full service number, installed motor nameplate and operator drawing before ordering. It is separate from three-phase motors and suffixed-H27 variants. A matching horsepower number alone does not establish mounting, shaft or electrical compatibility. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Drawings specifying this reference Match the exact operator and motor.
Three-phase circuits Not a direct phase conversion.
-H27 or other variants Verify the full service selection.
Other C-face motors Shaft, speed, electrical and mounting details must also agree.

Identify the Assembly and Plan the Repair

Record the existing nameplate and connection arrangement and diagnose the failed function. A power, brake, reducer or door-balance fault can prevent operation without establishing motor failure. Correct the cause of abnormal loading before returning the replacement to service.

Use the exact current connection diagram and mounting instructions. No RPM, frame size, capacitor value or rotation is inferred from another motor. Qualified personnel must verify the complete circuit and drive alignment and then perform normal operating, stopping and required protection-device tests.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference K20-1075C-2LP
Power 3/4HP
Supply designation 115/ 230V single phase
Mounting C-face
Frequency Source offer 60Hz; confirm delivered label
Reference K20-1075C-2LP without additional suffix

Before Ordering

  • Match the full motor number and nameplate.
  • Confirm supply, phase, frequency and C-face mounting.
  • Inspect controls and driven mechanical load.
  • Verify shaft engagement, wiring and commissioning requirements.

Package Contents and Separate Requirements

The offer identifies the motor. Reducer, brake, capacitor, pulley, mounting structure, harness and complete operator are separate unless expressly included. Confirm current supplied leads and mounting pieces. A motor-only order does not provide a complete drive renewal or electrical conversion.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Do not guess motor connections, capacitor requirements or rotation. Isolate every supply and secure the door before motor or drive service.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

Can a three-phase motor substitute?

No. Match the exact approved circuit and motor.

May I omit an extra suffix?

No. Confirm the full service reference.

Is the reducer included?

No reducer is promised.

Does it increase door capacity?

No approved capacity change is established.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products