LiftMaster K20-1050B-2RLP-H24 Replacement Motor — APT501L5

LiftMaster K20-1050B-2RLP-H24 Replacement Motor — APT501L5

$562.97
Skip to product information
LiftMaster K20-1050B-2RLP-H24 Replacement Motor — APT501L5

LiftMaster K20-1050B-2RLP-H24 Replacement Motor — APT501L5

K20-1050B-2RLP-H24
$562.97
Shipping calculated at checkout.

The LiftMaster K20-1050B-2RLP-H24 is the replacement motor identified for APT501L5 in the manufacturer APT parts drawing. Match the full service number, including its H24 suffix, and the actual installed operator configuration. It is separate from the clutch-shaft kit, brake kit, belt and complete trolley operator. A shortened motor number or matching horsepower alone does not establish compatible mounting, wiring or drive engagement. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
APT501L5 Manufacturer parts drawing identifies this motor.
Other APT revisions Check their exact motor reference and installed configuration.
Similar K20-1050B motors Do not omit suffixes or assume shaft/mounting equivalence.
Complete clutch or brake assemblies Separate service scope and components.

Identify the Assembly and Plan the Repair

Diagnose the motor circuit and driven mechanism before replacing the motor. A brake that does not release, a damaged belt or a binding door can prevent operation without establishing motor failure. Have the technician inspect the incoming supply, protective components, connections and mechanical load as applicable.

Compare the delivered motor nameplate and mounting with the model-specific repair information. Preserve the intended pulley alignment, drive relationship and wiring arrangement. Do not transfer voltage, rotation, speed or capacitor requirements from another motor with a similar number. After repair, verify both the original complaint and the complete door operating and protection functions.

An electrical symptom does not identify the failed component by itself. Have qualified service personnel inspect the supply, wiring, connections and equipment condition before replacing parts. Record existing labels and terminal references with power safely isolated. A replacement should restore the documented circuit arrangement; it should not be used to change operating voltage, defeat a protective function or compensate for a mechanical load that the equipment cannot safely move.

Compare the delivered item with the approved service reference before installation. The installer must obtain the equipment-specific wiring, mounting and commissioning instructions rather than infer them from the appearance of the part. Keep conductors clear of moving components and reinstall the intended covers. After the repair, check the original complaint and the equipment’s required operating and safety functions; a successful power-up alone is not a complete service test.

Specifications and Product Identification

Specification Details
Ordering reference K20-1050B-2RLP-H24
Documented operator APT501L5
Component Replacement motor
Ordering requirement Complete K20-1050B-2RLP-H24 reference
Electrical and shaft details Verify current motor label and exact operator instructions

Before Ordering

  • Confirm APT501L5 and the complete H24 suffix.
  • Record the existing motor nameplate.
  • Inspect brake, belt, drive alignment and door load.
  • Confirm current mounting, electrical and commissioning requirements.

Package Contents and Separate Requirements

This listing identifies the replacement motor. Clutch-shaft kit, brake assembly, belt, pulley, capacitor, electrical enclosure and complete operator are separate unless expressly bundled. Confirm the current motor carton and any supplied connection or mounting pieces. A parts diagram showing those components together does not imply a complete drive kit is supplied.

Safety Warnings — Read Before Installation or Service

  • WARNING: Electrical service can expose hazardous voltage and moving equipment. Use qualified service personnel and electrical personnel where required.
  • Disconnect every applicable mains, battery and auxiliary supply before work. Follow the equipment instructions for stored energy and safe isolation.
  • Secure the door and isolate power before motor work. Do not alter pulley ratio, motor wiring or protection to overcome a binding door.
  • Restore covers and wiring protection, then complete the model-specific functional and safety checks before returning the installation to normal use.

Related Products and Important Differences

Frequently Asked Questions

What operator is documented?

The APT parts drawing identifies APT501L5.

Can I ignore the H24 suffix?

No. Match the complete service reference.

Are the brake and belt included?

No combined package is promised here.

Will a motor replacement fix a binding door?

No. The mechanical load must be corrected separately.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products