LiftMaster K15-50B12PJH Drive Sprocket — #50, 12 Teeth, 1-3/16-Inch Bore

LiftMaster K15-50B12PJH Drive Sprocket — #50, 12 Teeth, 1-3/16-Inch Bore

$47.00
Skip to product information
LiftMaster K15-50B12PJH Drive Sprocket — #50, 12 Teeth, 1-3/16-Inch Bore

LiftMaster K15-50B12PJH Drive Sprocket — #50, 12 Teeth, 1-3/16-Inch Bore

K15-50B12PJH
$47.00
Shipping calculated at checkout.

The LiftMaster K15-50B12PJH is the supplier-listed #50-chain sprocket with 12 teeth, a 1-3/16-inch bore and a 5/16-inch keyway. It must match the specified drive position, shaft and ratio of the installed equipment. A shared chain size or similar tooth profile does not establish that another sprocket is a suitable replacement. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Specified drive position Match the exact service reference and hub arrangement.
#50 chain Necessary chain match; shaft geometry must also agree.
Other 12-tooth sprockets Bore, keyway, offset and retention may differ.
Other operator generations Verify the model-specific drive drawing; no universal fit claimed.

Identify the Assembly and Plan the Repair

Read the full part number and compare the installed shaft interface before ordering. Tooth count affects the drive relationship, while bore and keyway determine mechanical engagement. Selecting a sprocket by approximate outside diameter can overlook both concerns. Confirm the companion drive configuration using the approved operator documentation.

Inspect chain wear, alignment, shaft engagement and the retaining hardware. A new sprocket will not repair a worn keyway or restore elongated chain. Do not change tooth count to compensate for a heavy or binding door; have the complete drive and door condition assessed before returning the operator to service.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Plan the repair around the manufacturer’s instructions for the actual equipment revision. Confirm access, safe support and any separate hardware before removing the old part. After installation, restore the intended retention, alignment and guarding, then test the equipment under controlled conditions. The repair is complete only when the original fault has been addressed and the system’s required operating and protection functions have been checked.

Specifications and Product Identification

Specification Details
Ordering reference K15-50B12PJH
Chain size #50
Tooth count 12
Bore 1-3/16 inches
Keyway 5/16 inch

Before Ordering

  • Confirm #50 chain and 12 teeth.
  • Measure the specified bore and keyway.
  • Identify the correct drive position and ratio.
  • Inspect chain, shaft and retention components.

Package Contents and Separate Requirements

This listing identifies the sprocket. A chain length, joining link, shaft key, companion sprocket and complete shaft assembly are separate unless explicitly included by the supplier. Confirm the actual carton and any retention pieces before dismantling the drive. The dimensional description alone does not define a complete installation kit.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving commercial door and exposed drive sprocket — #50, 12 teeth, 1-3/16-inch bore can cause serious injury or death. Have a trained door-systems technician perform installation and service.
  • Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
  • Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
  • Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.

Related Products and Important Differences

Frequently Asked Questions

Will any 12-tooth sprocket work?

No. Chain, bore, keyway, hub and retention must match.

What is the bore?

The supplier specifies 1-3/16 inches.

Is a replacement shaft included?

No shaft is promised with the sprocket.

Can I change sprocket size to fix a binding door?

No. Diagnose the mechanical fault and use the approved drive selection.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products