LiftMaster K15-3619 Sprocket — 50B19T, 1-1/4-Inch Bore
The LiftMaster K15-3619 is the 50B19T sprocket identified for documented SL595 drive arrangements. It has 19 teeth for #50 chain, a 1-1/4-inch bore and a 1/4-inch keyway. Match the exact shaft, hub position and retention arrangement before ordering; chain size and tooth count alone do not establish a compatible replacement. This is a sprocket service component, separate from the idler shaft, chain and complete transmission, and it should be selected after inspecting the surrounding drive for wear or damage.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| Documented SL595 / SL595GL drives | Match the exact sprocket position and operator diagram. |
| #50 chain | Correct chain family; shaft and alignment must also match. |
| Other 19-tooth sprockets | Bore, hub, keyway and retention can differ. |
| Different tooth counts | Not an approved speed or ratio conversion. |
Identify the Chain Family Before Comparing Shaft Dimensions
A sprocket must match both the chain and the shaft. If an old invoice only identifies a 19-tooth sprocket, verify the complete part reference and the actual shaft dimensions before reordering. The 1/4-inch keyway is a defining selection detail. A sprocket that appears to fit loosely on the shaft is not suitable simply because its teeth engage the chain.
Have the technician inspect shaft wear, the keyway, chain and mating sprocket together. The replacement must sit in the correct chain line with adequate hub clearance and the documented retention arrangement. Worn connections can remain a problem after the sprocket is replaced. Preserve the approved tooth count and ratio rather than modifying the drive to change operating speed during an ordinary repair.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Part number | K15-3619 |
| Designation | 50B19T |
| Teeth | 19 |
| Chain family | #50 |
| Bore | 1-1/4 inches |
| Keyway | 1/4 inch |
Before Ordering
- Match the complete K15-3619 reference.
- Verify #50 chain, 19 teeth, 1-1/4-inch bore and 1/4-inch keyway.
- Inspect hub clearance, shaft condition and retention.
- Check chain and mating sprockets for wear and alignment.
Package Contents and Separate Requirements
This listing identifies the sprocket service item. A shaft, shaft key, chain, master link and every retention fastener are not promised as included. Confirm the current carton and order any separately required components for the repair. The correct chain length must be determined from the installed equipment; a stock length of replacement chain is not automatically the finished length needed.
Safety Warnings — Read Before Installation or Service
- WARNING: Exposed chain drives can entangle clothing or trap fingers and cause serious injury. Use a qualified door- or gate-systems technician.
- Isolate all applicable power and secure the moving equipment before removing a chain or sprocket.
- Do not enlarge the bore, improvise the shaft connection or substitute a different chain family to make a part fit.
- Restore guards and complete the equipment’s prescribed operating and safety tests before normal use.
Related Products and Important Differences
- #50 roller chain — a matching chain-family option; determine the required installed length.
- #50 master link — a separate joining component for the correctly selected chain.
Frequently Asked Questions
How many teeth does it have?
The 50B19T designation identifies 19 teeth for #50 chain.
What shaft dimensions are specified?
A 1-1/4-inch bore and 1/4-inch keyway; verify hub and retention details too.
Is chain included?
No length of chain is promised with this sprocket.
Can I choose a different tooth count?
Only if approved for the complete operator drive; do not improvise a ratio change.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.