LiftMaster K12-10331 Flange Bearing — 3/4 × 1-1/2 × 1/8 Inch

LiftMaster K12-10331 Flange Bearing — 3/4 × 1-1/2 × 1/8 Inch

$11.31
Skip to product information
LiftMaster K12-10331 Flange Bearing — 3/4 × 1-1/2 × 1/8 Inch

LiftMaster K12-10331 Flange Bearing — 3/4 × 1-1/2 × 1/8 Inch

K12-10331
$11.31
Shipping calculated at checkout.

The LiftMaster K12-10331 is a flange-bearing service part with the manufacturer catalog size description of 3/4 by 1-1/2 by 1/8 inch. It supports the specified shaft arrangement in documented commercial-door operator assemblies and must be selected using the exact bearing position and parts drawing. A matching shaft size alone does not establish that another bearing has the correct flange, body or retention geometry. Inspect the shaft and mounting support during diagnosis so the replacement is not fitted to a worn or distorted mating assembly.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Assemblies specifying K12-10331 Match the exact model, bearing position and parts drawing.
K12-10029 Different dimensions; no substitution by shared nominal shaft size.
Other 3/4-inch bearings Body, flange, retention and intended use must also match.
Worn shaft or housing Separate defects requiring assessment before replacement.

Inspect the Shaft and Mounting Support with the Bearing

Noise, looseness or rough rotation can involve the bearing, shaft surface, alignment or mounting support. Have the technician check the complete assembly before deciding which parts to retain. A replacement bearing installed on a damaged shaft may not restore the intended fit, and a distorted support can leave the drive misaligned even after the bearing is replaced.

Locate the exact bearing position in the operator diagram and record the arrangement before disassembly. Do not enlarge a mounting opening or force a mismatched flange into place. Follow the manufacturer’s assembly, retention and lubrication guidance for the service part. Inspect related chain and shaft connections while access is available, then restore guards and complete the required door-operating checks.

Specifications and Product Identification

Specification Details
Part number K12-10331 / 12-10331
Component Flange bearing
Catalog dimensions 3/4 × 1-1/2 × 1/8 inch
Selection basis Exact operator bearing position and housing
Different reference K12-10029; different size description

Before Ordering

  • Record the complete operator and bearing position.
  • Match K12-10331 and its catalog size description.
  • Inspect the shaft surface and mounting opening for damage.
  • Confirm the required quantity and service-package hardware.

Package Contents and Separate Requirements

This offer identifies the K12-10331 flange bearing. A complete shaft assembly, sprocket, drive chain, housing and operator are not promised as included. Confirm the quantity and any supplied retention pieces before ordering. Several bearings can appear in the same operator drawing; use each location’s reference rather than assuming that a single bearing type or package services every shaft in the equipment.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving commercial door and exposed shafts and bearing supports can cause serious injury or death. Have a trained door-systems technician perform installation and service.
  • Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
  • Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
  • Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.

Related Products and Important Differences

  • #50 roller chain — a separate drive component where the actual operator specifies this chain family.
  • #50 master link — a separate chain component; bearing size alone does not establish chain compatibility.

Frequently Asked Questions

What size is listed?

The manufacturer catalog describes 3/4 × 1-1/2 × 1/8 inch.

Is K12-10029 equivalent?

No. That bearing has a different catalog size description.

Does the listing identify a complete shaft kit?

No. It identifies the bearing service part.

Will a new bearing repair a damaged housing?

No. The support and shaft require separate assessment and repair.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products