LiftMaster 50-HERK-RC2 Programming Remote — 50-HERK2 Motion Sensor
The LiftMaster 50-HERK-RC2 is the programming remote identified in the 50-HERK2 microwave motion-sensor instructions. It lets the installer adjust the compatible sensor from ground level and receive setting feedback through the documented programming interface. It is not a conventional visor remote for opening a garage door and does not add a new radio receiver. Match the actual sensor model and programming instructions before ordering; a similar remote-control keypad or shared LiftMaster branding does not establish compatibility with another motion detector.
Compatibility — Models, Versions and Exclusions
| Model or selection point | Compatibility requirement |
|---|---|
| 50-HERK2 instructions naming this remote | Match exact sensor and programming procedure. |
| Other Hercules sensors | Require their own documented remote compatibility. |
| Security+ garage-door receivers | No opener-remote compatibility established. |
| Motion activation sensing | Separate from required entrapment protection. |
| A sensor with a locked programming session | Follow authorized sensor access procedure; remote alone does not change access rights. |
Use the Correct Programming Tool for the Sensor
Record the sensor model and current settings before changing the detection area or operating behavior. The remote’s purpose is to make the documented adjustment process accessible from the ground; it does not remove the need to understand the doorway and traffic pattern. Have a qualified installer assess how any proposed change affects activation of the door.
Follow the exact sensor instructions for establishing the programming connection, checking returned values and ending the session. A setting that has not been fully transferred should not be assumed active. After adjustments, test the intended approach paths and normal traffic conditions under controlled supervision. Check the door’s required safety devices separately, because a microwave activation sensor is not proof that an obstruction will be detected by the protection system.
Specifications and Product Identification
| Specification | Details |
|---|---|
| Model | 50-HERK-RC2 |
| Product | Sensor programming remote |
| Documented sensor | 50-HERK2 |
| Communication role | Programming and setting feedback |
| Normal door-opening remote | Not the documented purpose |
| Sensor package relationship | Remote is separately identified, not provided with sensor |
Before Ordering
- Confirm the sensor model is documented for 50-HERK-RC2.
- Record existing settings and intended adjustment.
- Check current remote package and power requirements.
- Plan setting-feedback, traffic-activation and separate safety tests.
Package Contents and Separate Requirements
This offer identifies the 50-HERK-RC2 programming remote. The50-HERK2 motion sensor, door operator, safety sensors, mounting bracket and complete access-control system are not promised as included. Confirm any supplied batteries and reference materials in the current remote package. The sensor manual identifies the remote as a separately obtained programming tool; a diagram showing the remote communicating with a sensor does not mean the sensor accompanies this order.
Safety Warnings — Read Before Installation or Service
- WARNING: Sensor programming can change when a powered door activates. Use qualified personnel and keep people clear during controlled tests.
- Follow the sensor’s authorized programming procedure and verify that each setting was received before returning the installation to use.
- Do not use activation sensing as a substitute for required entrapment protection or bypass safety devices to test motion detection.
- Test the full intended traffic pattern and all required door safety responses after adjustment.
Related Products and Important Differences
- CPS-U monitored photo eyes — separate protection devices for approved commercial-door controls; match the operator and environment.
- TDC12X1BMC MAXUM trolley operator — a complete-operator comparison, not evidence that this legacy service part fits MAXUM.
Frequently Asked Questions
Does it open my garage like a visor remote?
That is not its documented purpose; it programs the compatible sensor.
Which sensor is identified?
50-HERK2.
Is the sensor included?
No. This offer identifies the remote.
Must I check settings after transmission?
Yes. Follow the manufacturer feedback and testing procedure.
Need Help Confirming the Right Product?
Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Details
Need Help With Compatibility?
Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.
Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.
For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.
Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.
Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.