LiftMaster 18-10164 Clutch Spring — Documented 1/3 and 1/2 HP Arrangements

LiftMaster 18-10164 Clutch Spring — Documented 1/3 and 1/2 HP Arrangements

$36.84
Skip to product information
LiftMaster 18-10164 Clutch Spring — Documented 1/3 and 1/2 HP Arrangements

LiftMaster 18-10164 Clutch Spring — Documented 1/3 and 1/2 HP Arrangements

18-10164
$36.84
Shipping calculated at checkout.

The LiftMaster 18-10164 is the clutch spring identified for the documented one-third and half-horsepower commercial operator arrangements. Manufacturer service drawings distinguish it from the spring used on specified three-quarter and one-horsepower versions. Select it by the exact clutch assembly and operator rating; this spring is not a door counterbalance spring or a universal way to increase clutch holding force. Select the replacement by the complete part number and the installed equipment configuration. A similar photograph or a shared LiftMaster brand name does not establish interchangeability. Confirm the applicable service drawing before ordering so the repair addresses the correct component and its related mounting, connection and operating requirements.

Compatibility — Models, Versions and Exclusions

Model or selection point Compatibility requirement
Documented 1/3 / 1/2 HP clutch Match the exact drawing and installed configuration.
3/4 / 1 HP arrangements Use their specifically identified spring reference.
Other clutch generations Do not infer fit from horsepower alone.
Door counterbalance A clutch spring is not a torsion or extension spring.

Identify the Assembly and Plan the Repair

The clutch spring works with friction and pressure components in a specific arrangement. Inspect the clutch disc, shaft support and related hardware before selecting a spring-only repair. A new spring cannot correct damaged friction surfaces or a door that binds and imposes abnormal load.

Do not stretch, shim or substitute a different spring to obtain more force. The correct spring and approved adjustment restore the documented clutch behavior. Have a qualified technician check door movement and the drive before service, then complete the operator’s prescribed clutch and safety tests after the repair.

Compare the replacement with the installed service arrangement before dismantling the equipment. Photograph the part’s location and record the complete model and visible service numbers. Inspect the surrounding attachment points and mating components for wear, impact damage or misalignment. Replacing one worn item will not correct a damaged support or another component that continues to impose abnormal loads on the repaired assembly.

Specifications and Product Identification

Specification Details
Ordering reference 18-10164
Component Clutch spring
Rating context Specified 1/3 and 1/2 HP arrangements
Related distinction 18-10168 separately identified for higher-rating arrangements
Service scope Individual clutch component, not a complete shaft kit

Before Ordering

  • Record the operator model and horsepower configuration.
  • Match 18-10164 in the exact clutch diagram.
  • Inspect friction surfaces and adjoining retention hardware.
  • Use the approved spring installation and clutch adjustment procedure.

Package Contents and Separate Requirements

This offer identifies the clutch spring service item. A complete clutch shaft, clutch disc, pressure plate, bearing, adjustment hardware and operator are not established as included. Confirm the current supplied spring and obtain other worn clutch components separately when required.

Safety Warnings — Read Before Installation or Service

  • WARNING: A moving commercial door and exposed clutch spring — documented 1/3 and 1/2 hp arrangements can cause serious injury or death. Have a trained door-systems technician perform installation and service.
  • Disconnect mains power and any battery backup before mechanical work or wiring. Secure the door against unexpected movement as directed by its manufacturer.
  • Do not work on springs, cables or counterbalance components without appropriate training. Never bypass safety sensors or increase force to overcome binding.
  • Restore guards and complete the model-specific travel, reversal and protection-device tests before returning the door to normal operation.

Related Products and Important Differences

Frequently Asked Questions

Is this a garage door torsion spring?

No. It is a spring within the documented operator clutch mechanism.

Can it replace the higher-horsepower spring?

Do not assume so. The manufacturer lists a separate spring reference for those documented arrangements.

Will extra spring force fix door resistance?

No. Diagnose and repair the door or drive fault and use the approved clutch setup.

Does horsepower alone prove compatibility?

No. The exact clutch generation, part number and service drawing must also match.

Need Help Confirming the Right Product?

Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.

Details

Need Help With Compatibility?

Not sure if this is the correct part for your garage door, operator, gate system, or application? Contact Us before ordering — we’re happy to help.

Garage-DoorParts.com carries a large selection of residential and commercial parts, and many components can look similar while having important differences in dimensions, model numbers, voltage, mounting, or compatibility.

For the best assistance, please provide as much information as possible, including the manufacturer, model number, part number, door or operator type, dimensions, and clear photos of the existing part or equipment.

Our goal is to help you identify the correct product before you order and reduce the possibility of ordering an incompatible part.

Contact Us with your product questions and compatibility information, and we’ll do our best to point you in the right direction.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Related products